Aviation Jobs and Aviation Careers

Call us: 303-683-2322
M-F 9-5 MST

916
Registration Options Job Search Job Search (BETA) Job of the Week Salary, Wages and Pay Jobs Map Stats
List All AECOM job details and career information
Register

Please Register or sign in to apply for jobs using our automated tools and professional resume builder.


Apply for Sheet Metal Mechanic II job at AECOM today Sheet Metal Mechanic II job at AECOM
location on map is approximate

Sheet Metal Mechanic II

AECOM
Jacksonville, FL
United States

Hourly: USD
Unspecified
List All AECOM Jobs

Business Line Government
Position Title Sheet Metal Mechanic II
United States of America - Florida
Jacksonville

Job Summary:

Sheet Metal Mechanic II
MUST MEET SECURITY CLEARANCE REQUIREMENTS.
THIS POSITION HAS A ROTATING SHIFT.
When required you may be subject to shift changes weekend holiday and overtime work.
Shift work weekends mandatory overtime (with proper notice given) and cross-training can be required in order to meet
daily/weekly workload requirements.
Responsible for inspecting training personnel and performing organizational intermediate and depot level
maintenance/modification on contract units sub-systems support equipment and related weapons system. Advise team
members and solve unusual maintenance problems by analysis and test engines pneudraulic fuel electrical/electronic
systems etc. Acts as Special Maintenance Technical Advisor to the Site or Team Supervisor. Position reports to the
Supervisor.
+ Services repairs and overhaul equipment and engines.
+ Repairs replaces and rebuilds equipment and engine components fuel systems (including cells tanks and fuel/metering
+ control systems) and functional components using hand tools power tools welding equipment rivet gun and drills.)
+ Inspects and repairs power plants (engines) malfunctions including cracked components oil leaks etc.
+ Diagnoses malfunctions isolate causes and correct breaks.
+ Test engine operations using testing equipment to locate source of malfunction.
+ Replaces and repairs damaged components uses hand tools gauges and tests equipment.
+ Removes engine and major components from equipment using hoist or other lifting devices.
+ Disassembles and inspects parts for wear warping or other defects.
+ Repairs and replaces defective engine components and reassemble and install engine on weapon systems and vehicles.
+ Adjusts repairs or replaces instruments electrical/electronics fuel/oil systems and accessories.
+ Performs vehicle services including engine flush/cleaning parts lubrication and maintenance checks.
+ May service engine components operations making repairs and overhaul required to ensure safe operating condition.
+ May specialize in repair and modification of engines structural components precision repair functional spare parts and assemblies.
+ Recommends revisions to maintenance procedures to improve efficiency and ensure quality workmanship.
+ Perform all other position related duties as assigned or requested.
FRCSE DLM SOW:
3.15.1 AIRCRAFT SHEET METAL MECHANIC (Wage Determination Occupation 23022 Aircraft Mechanic II):
3.15.1.1 The Aircraft Mechanic II maintains repairs and modifies aircraft structures and structural components of moderate
difficulty maintains and repairs aircraft components including but not limited to flight controls engines hydraulics
pneumatics fuel systems and mechanical components applies technical knowledge of airframe and power plant systems in
determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation and
applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation
such as; blueprints or manufactures manuals.
Job requirements: Must have a thorough knowledge of aircraft mechanical component troubleshooting repair procedures and
replacement of parts requires broad knowledge of aircraft sheet metal/structural modifications and repair must have basic
knowledge of electrical theory must have thorough knowledge of aircraft unique tools such as test equipment torque
wrenches dial indicators micrometers sheet metal brakes and sheers. This job requires working knowledge of technical
publications. The incumbent receives technical guidance as required from supervisor or higher-level technician will
occasionally be required to lead teams through more complex aircraft relevant tasks and may be required to make entries in
aircraft logs and records. Must be able to prioritize workload in order to maintain schedules on assigned projects.
Contractor personnel shall perform a full range of aircraft sheet metal duties including but not limited to disassemble modify
repair and reassemble complex aircraft metal items and systems e.g. bulkheads airframes spars air scoops wings flaps
pylons sponsons fuselages skins ribs gussets and fuel tanks. These items and systems have combined straight and curved
edges and irregular curves and planes. Contractor personnel shall analyze and evaluate structural damage to metal systems
and items; develop patterns using a combination of parallel and radial line development; fabricate install and repair a variety
of items and systems made from a wide variety of metals e.g. stainless steel copper sheet magnesium honeycomb alloys
aluminum; replace sections and patch old systems; cut bend shape and form metals for items that have numerous irregular
angles planes and curves with varying pitch and circumference; use a variety of assembly joints complex fastening
systems riveted or welded joints drill or punch holes; and assemble or repair items by seaming soldering bolting screwing
riveting tacking and spot welding. Assembly methods shall meet appearance and strength standards as well as critical
tolerances. As a condition of employment Contractor personnel will be required to pass a FRCSE administered certification
skills examination.
3.15.1.2 Contractor personnel shall use precision measuring instruments such as calipers protractors snap ring height
depth dial and screw pitch gauges squares rulers trammel points and sine bars. Contractor personnel will also be required
to use oxyacetylene cutting torches and electric arc welding machines.
3.15.1.3 Contractor personnel shall have at least two years of documented experience in Aerospace and/or Aircraft Sheet
metal procedures and processes. The Contractor shall provide verification to the COR of this experience during the first 30
days of performance and/or upon hiring. FRCSE Quality Assurance personnel will provide Contractor personnel with cold
working/hole quality special skill certification training and will provide and subject Contractor personnel to recertification
requirements pursuant to FRCSEINST 4855.6C Standard Operating Procedure (SOP) 6.2-5(6.4). The Government will bear
the cost of all Cold Working/Hole Quality Special Skill Certification and Recertification training and instruction as required by
FRCSEINST 4855.6C.
Minimum Requirements
+ High school graduate or equivalent is desirable.
+ Five (5) years actual and recent vehicle or missile or related weapon systems experience desired; three (3) years required.
+ Must be able to speak read write and understand English.
+ In accordance with the contract all personnel performing work require United States citizenship or acceptable proof of naturalization prior to employment.
+ Thorough knowledge of technical publications related to weapon systems and vehicles.
+ Must have knowledge of the scope and limitation of various categories of maintenance and their application to the contract unit.
+ Must know theory and principles of engine operations; accessories and components; electrical and electronic; pneudraulic; and mechanical principles.
+ Knowledge of sheet metal properties of materials fuels and oils.
+ Must be able to read interpret and use manufacturers maintenance manuals service bulletins blueprints wiring and schematic diagrams data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.
+ Must be able to inspect repair and operate ground support and auxiliary equipment.
+ Must possess and maintain a valid drivers license and be able to operate a government general-purpose vehicle.
Must pass the Fleet Readiness Center Southeast (FRCSE) administered test requirements:
20 question written test on Blue Print Interpretation.
Once the candidate passes the written test the practical graded test is given:
2- 4x4 sheets of metal
1 drawing
Tool Kit
Fasteners
The Sheet Metal Worker Candidates are required to Prep and Layout the material IAW the provided drawing. Prior to
installation of fasteners the project to this point is evaluated by the FRC instructor and in the case of a contractor the Site
Manager or Program Manager. Then the candidate is given instruction per the drawing to install 5 rows of different type of
fasteners Hi-Loks Solid Buttons Flush Countersinks.
MUST PASS A GOVERNMENT BACKGROUND CHECK.
Preferred Qualifications
F-18 and/or close tolerance sheet metal experience preferred.
What We Offer
AECOM is a place where you can put your innovative thinking and business skills into high gear and work alongside other highly intelligent and motivated people. Its a place where you can apply your skills to some of the worlds most challenging interesting and meaningful projects worldwide. Its a place that values the diversity of our areas of practice and our people. Its what makes AECOM a great place to work and grow.
AECOM is an equal opportunity employer and Minorities Females Veterans and Disabled persons are encouraged to apply. For further information please click here to view the EEO Is The Law poster.
Job Category: Maintenance
Business Group Management Services Group (MS)
Country United States of America
Position Status Full-Time
Requisition/Vacancy No. 186603BR
Qualified applicants will receive consideration for employment without regard to race color religion sex national origin sexual orientation gender identity disability or protected veteran status.Avjobs.com
Sheet Metal Mechanic II job at AECOM
Apply for this Sheet Metal Mechanic II position today

Register

Please sign in to apply for this job.


Apply for these great jobs today!

Ground Handling Supervisor Sacramento CA
Lead & Direct Ground Handling Agents Lead by Example w/ Industry Knowledge
Turbopower LLC, Opa Locka FL Now Hiring!
Lured by the powerful roar of an engine? We recruit the best Talent. Apply Today!
Warehouse Associate, Coral Springs FL
Aviation Exp a Plus-Warehouse Shipping & Receiving Exp-3 yrs Preferred. Apply Now
Pilot AC208BEX, Destin FL
1500 TT, 1000 PIC, 300 Tactical Rotary Fixed Wing, US Security Clearance
Colony Brands Inc, Janesville WI
Several Aviation Job Openings Available First Officer, Mechanic, Charter Sales
Assistant Airfield Manager, Vienna OH
Perform Airfield Management Services Must have USAF AFM Cert & Assoc Degree
Quality Control Export Mgr-Coral Springs
5 Yrs Managing Aviation Quality Control, 5 Yrs Aviation Exp Required. Apply Now!
Flight Instructor, Tulsa OK
We're Hiring Flight Instructors! Current FAA Flight Instructor Cert
Ops & Member Services Spc, Washington DC
Provide Legislative, regulatory, tech, & Flight Ops Info to Members, Apply Now!
Custodian & Floor Technician, Tulsa, OK
Looking for Airframe & Powerplant Techs Great Work Environment & Advancement Ops

Get Job Updates (it's free) Get Job Updates (it's free)

Enter your email to get FREE job updates.

CLAIM YOUR FREE MONTH

Aviation Applicant Registration Options

Preferences

Sheet Metal Mechanic II job at AECOM

Sheet Metal Mechanic II job at AECOM

Sheet Metal Mechanic II job at AECOM

Sheet Metal Mechanic II job at AECOM

Follow Us

Site Map | Aviation News | RSS Feeds | Media Info | Job Opportunities | Contact Us

® Avjobs, Inc. © Copyright 1988-2018 All Rights Reserved Terms of Use | Sales & Refunds | Privacy Policy | Security Statement