Butler America Aerospace job details and career information

Component Technician Featured

Location
Santa Fe Springs, California
Wage
Hourly
Job ID
21254740904
Posted
2022-1-14

Component Technician
Location: Santa Fe Springs CA (90670)
Job ID: #62154 8 month contract
Email resumes to Sara Penn at ...@butler.com
Job Description
The Component Technician is responsible for performing technical/mechanical/inspection functions pertaining to the aircraft wheel and brake component overhaul process.
Primary Responsibilities:Conducts receiving inspection of in-coming assemblies/components in accordance with established procedures and technical data.
Performs disassembly wash blast paint build-up pressure test receiving inspection and final inspection and assembly of aircraft components according to customers specifications airworthiness directives applicable manufacturers CMM guidelines and operating procedures.
Manual handling and maneuvering (rolling lifting) of large aircraft wheels and brakes. Maintains proper segregation and identification of components in progress.
Maintains current knowledge of and complies with customer/Federal Aviation Administration (FAA)/Joint Aviation Administration (JAA) technical data as applicable to the work assigned.
Performs painting functions including mixing of primer/paint as well as application of primer/paint. Performs general shop and equipment maintenance; practices the principles of the Five Ss by creating and maintaining a neat orderly work area; identifies ways to remove non-value added steps from all processes and strives to produce products in the least-waste-way.
Consistently demonstrates a commitment to continuous process improvement and practices; actively participates and supports process improvement events.
Looks for ways to eliminate safety hazards and improve the overall safety of the workplace.
Provides limited training to other Component Technicians where qualified.
Performs other duties or responsibilities as assigned.
This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAAs regulation 14 CFR part 120 as well as 49 CFR part 40. Working Environment: Works in a repair and overhaul shop environment. Continuous standing and walking. Employee will be exposed to hazardous waste and will comply with all Regulatory State Local and Corporate requirements for handling hazardous waste.

Education and Certifications:High School Diploma or equivalent

Experience and Qualifications:Three months prior manufacturing and/or production experience and ability to attain required operating certifications.
Use of basic hand tools including measuring instruments.
Must have the ability to multitask.
Requires the ability to read write and speak English.
Must be able to articulate and understand verbal and written instructions.
Ability to work as a team member. Understand component maintenance manuals and all other applicable technical documents.
Must be able to lift up to 35 pounds. Employees will utilize a lift assist or buddy system if greater than 35 pounds.
US Citizen and US Person candidates permitted
All leased labor are subject to a 10 panel drug test. The FAA Drug and Alcohol program is a special program requiring an additional 5-panel drug screen with training prior to starting their assignment.

Butler America Aerospace LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees our customers and the communities where we are located. Employment with Butler America Aerospace LLC. is governed on the basis of qualifications and competence without regard to race color religion gender national origin ethnicity veteran status disability status age sexual orientation gender identity gender expression marital status mental or physical disability or any other legally protected status.

Aircraft Mechanic Technician Olivehurst CA

Aircraft Maintenance Technician Gilroy CA

Aircraft Maintenance Technician Central Ca Gilroy CA

Aircraft Maintenance Technician Central Ca San Martin CA

Shop Helper apprentice Aviation Technician Novato CA

Field Avionics Technician Non Deployable Wrightwood CA

Field Avionics Technician Non Deployable Llano CA

Aircraft Technician Mountain View CA

Aviation Supply logistics Technician Lemoore CA

Field Avionics Technician Non Deployable Adelanto CA

The following jobs have been promoted on the Aviation Ad Network and are to be considered - current, newsworthy aviation employment information (FYI). No guarantee is made as to the accuracy, completeness or timeliness of any information, projections or opinions in announcements obtained through the promoted jobs. The information contained in this announcement is compiled for the convenience of site visitors and is accepted by the site visitor on the condition that errors or omissions are not the responsibility of Avjobs and shall not be made the basis for any claim, demand or cause of action. Please visit this companys web site for additional details and information. Please reference Avjobs when applying.

Top Employer Butler America Aerospace Jobs
Website
www.avjobs.com/companies
Job Feed
View
News Feed
View
List All Butler America Aerospace Jobs

Don't wait, apply today.
We can't wait to receive your resume.

Butler America Aerospace is accepting resumes and actively recruiting for this Component Technician position in Santa Fe Springs, California. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Component Technician

Location: Santa Fe Springs CA

Industry: Aviation
Occupational Category: Maintenance
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: Butler America Aerospace seeks a Component Technician.
Component Technician
Location: Santa Fe Springs CA (90670)
Job ID: #62154 8 month contract
Email resumes to Sara Penn at
Job Description
The Component Technician is responsible for performing technical/mechanical/inspection functions pertaining to the aircraft wheel and brake component overhaul process.
Primary Responsibilities:Conducts receiving inspection of in-coming assemblies/components in accordance with established procedures and technical data.
Performs disassembly wash blast paint build-up pressure test receiving inspection and final inspection and assembly of aircraft components according to customers specifications airworthiness directives applicable manufacturers CMM guidelines and operating procedures.
Manual handling and maneuvering (rolling lifting) of large aircraft wheels and brakes. Maintains proper segregation and identification of components in progress.
Maintains current knowledge of and complies with customer/Federal Aviation Administration (FAA)/Joint Aviation Administration (JAA) technical data as applicable to the work assigned.
Performs painting functions including mixing of primer/paint as well as application of primer/paint. Performs general shop and equipment maintenance; practices the principles of the Five Ss by creating and maintaining a neat orderly work area; identifies ways to remove non-value added steps from all processes and strives to produce products in the least-waste-way.
Consistently demonstrates a commitment to continuous process improvement and practices; actively participates and supports process improvement events.
Looks for ways to eliminate safety hazards and improve the overall safety of the workplace.
Provides limited training to other Component Technicians where qualified.
Performs other duties or responsibilities as assigned.
This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAAs regulation 14 CFR part 120 as well as 49 CFR part 40. Working Environment: Works in a repair and overhaul shop environment. Continuous standing and walking. Employee will be exposed to hazardous waste and will comply with all Regulatory State Local and Corporate requirements for handling hazardous waste.

Education and Certifications:High School Diploma or equivalent

Experience and Qualifications:Three months prior manufacturing and/or production experience and ability to attain required operating certifications.
Use of basic hand tools including measuring instruments.
Must have the ability to multitask.
Requires the ability to read write and speak English.
Must be able to articulate and understand verbal and written instructions.
Ability to work as a team member. Understand component maintenance manuals and all other applicable technical documents.
Must be able to lift up to 35 pounds. Employees will utilize a lift assist or buddy system if greater than 35 pounds.
US Citizen and US Person candidates permitted
All leased labor are subject to a 10 panel drug test. The FAA Drug and Alcohol program is a special program requiring an additional 5-panel drug screen with training prior to starting their assignment.

Butler America Aerospace LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees our customers and the communities where we are located. Employment with Butler America Aerospace LLC. is governed on the basis of qualifications and competence without regard to race color religion gender national origin ethnicity veteran status disability status age sexual orientation gender identity gender expression marital status mental or physical disability or any other legally protected status.

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2022-1-14

Please Apply by: 2022-1-30