Embraer job details and career information

Assembly Technician Iii Featured

Location
Melbourne, Florida
Wage
Hourly
Job ID
177292
Posted
2019-6-24
I'm Interested

POSITION WILL BE LOCATED IN FLIGHT PREP ON 2ND SHIFT

POSITION SUMMARY

Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations. Analyze processes and process improvement. May be responsible for distributing activities and goals coordinate and guide technical support groups. Assist with new operators as well as assist in processes analysis.

JOB RESPONSIBLITIES

  • Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules boards panels drawers frames and cables.
  • Works from diagrams and drawings makes initial layouts and uses hand and/or power tools jigs and saws.
  • Makes continuity checks on work in process and completed.
  • May conduct quality inspections on processing line in accordance with quality specifications.
  • May disassemble modify rework reassemble and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
  • Follows approved assembly procedures for component or aircraft structures consulting internal procedures that have been FAA approved original equipment manufacturers (OEMs) technical data and work package instructions.
  • Positions and aligns subassemblies in jigs or fixtures using measuring instruments following blueprint lines and index points.
  • Inspects completed work to identify any needed rework before signing off; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests as required utilizing test equipment specified in technical manuals.
  • Completes work package documentation as required by FAA and/or repair station manual.
  • Submits completed work to Quality Assurance for final/in progress inspection and certification of airworthiness.

ESSENTIAL KNOWLEDGE SKILLS AND ABILITIES

Education:

  • High School/ GED
  • AP and mechanical/electrical experience a plus
  • Structures experience a plus.

Experience:

  • Advanced Technician Role requiring Advanced Skills to perform all standard tasks within the Technical Area assigned to – may be referred to as the ‘SME (Subject Matter Expert).
  • Generally at least 5-7 years or more of experience in area of responsibility with assembly mechanical electrical or aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.

Knowledge Skills Abilities:

  • Assignments require Comprehensive Knowledge of all possible tasks and responsibilities within their Technical Area.
  • Skills are broadly applied in multiple Technical Areas.
  • Performs complex Technical Assignments requiring analysis of multiple factors.
  • Proficient in riveting installation of relate hardware usage of precision instruments and utilization of hand tools to perform these tasks.
  • Must be able to fabricate parts.
  • Reads work orders blueprints and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
  • Repair body or structure of aircraft according to specifications.
  • Knowledge of machines and tools including their designs uses repair and maintenance.
  • Be proficient in the usage of air powered hand tools and related equipment.
  • Knowledge of raw materials production processes quality control costs and other techniques for maximizing the effective manufacture and distribution of goods.
  • Ability to work different shifts and flexible hours if required.
  • Ability to work in a safe professional manner adhering to all regulatory requirementsincluding OSHA EPA State and Federal regulations.

Working Conditions / Environment/ Special Requirements

  • Ability to work in a safe professional manner adhering to all regulatory requirementsincluding OSHA EPA State and Federal regulations.
  • As required by the position must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 Respirator Protection regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
  • Ability to work flexible hours and different shifts if required
  • Employees will be subject to the random drug and alcohol testing under FAA regulations

GENERAL COMMITMENT FOR ALL EMPLOYEES

  • Commitment to company values and complies with department norms policies directives and procedures.
  • Incorporates Lean and P3E processes and concepts into daily activities.
  • Strive for continuous improvement to processes and procedures.
  • Honors and protects confidential and proprietary documents and information.
  • Satisfies work schedule requirements.
  • The job description is not designed to cover or contain a comprehensive listing of all activities duties or responsibilities that are required by the employee. Performs other duties as assigned

Category: Operational
Area: Production

Assembly Technician Iii Melbourne FL

Mrb Engineer Ii iii Aerodynamics Melbourne FL

A P Technician Ii Melbourne FL

A P Technician Ii Melbourne FL

Avionics Technician Ii Melbourne FL

Aog A P Technician Ii Ft Lauderdale FL

Aog A P Technician Iv Ft Lauderdale FL

A P Technician Iii Weekend Shift Ft Lauderdale FL

Gse Technician Macon GA

Ap Technician Multiple Openings Relocation Bonus Provided Nashville TN

We have built one of the largest aerospace companies in the world. This has been made possible thanks to the dedication of people from all over the world who have a genuine passion for stretching the boundaries of what is possible. It has been like this from the beginning, and we continue being guided by the desire to work with people motivated by this challenge. At Embraer, we pay attention to all the stages of professional life, which is why we offer educational programs and special projects that serve everybody, from talented youth to those looking beyond retirement. Here we have the opportunity to integrate different cultures into a global environment, and to follow personal development throughout the span of one’s career. Get to know the programs and positions we have available in Brazil and around the world. Understand that here our focus is on partnerships, human development, and allowing you to grow in areas that correspond to your interests. Come be a part of Embraer.

I'm Interested

Top Employer Embraer Jobs
Website
www.embraer.com
Job Feed
View
News Feed
View
List All Embraer Jobs

Don't wait, apply today.
We can't wait to receive your resume.

Embraer is accepting resumes and actively recruiting for this Assembly Technician Iii position in Melbourne, Florida. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Assembly Technician Iii

Location: Melbourne FL

Industry: Aviation
Occupational Category: Maintenance
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: Embraer seeks a Assembly Technician Iii.

POSITION WILL BE LOCATED IN FLIGHT PREP ON 2ND SHIFT

POSITION SUMMARY

Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations. Analyze processes and process improvement. May be responsible for distributing activities and goals coordinate and guide technical support groups. Assist with new operators as well as assist in processes analysis.

JOB RESPONSIBLITIES

ESSENTIAL KNOWLEDGE SKILLS AND ABILITIES

Education:

Experience:

Knowledge Skills Abilities:

Working Conditions / Environment/ Special Requirements

GENERAL COMMITMENT FOR ALL EMPLOYEES


Category: Operational
Area: Production

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2019-6-24

Please Apply by: 2019-7-10