ONIT Aviation Services Inc job details and career information

Savannah Numerical Controls Engineer III Featured

Location
Savannah, Georgia
Wage
Hourly
Job ID
AV2152233
Posted
2018-12-17


ONIT Aviation is seeking qualified Contract - NC Eng III - REQ# 141105 in GAC Savannah

FAA Regulated?: No

Unique Skills:

Strong 5-axis programming background in CATIA V5. Master Cam knowledge preferred. Vericut Knowledge preferred.

Education and Experience Requirements:

Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.

Position Purpose:
Under minimal supervision, perform activities related to complex numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Principle Duties and Responsibilities:
Essential Functions: 1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size. 2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan. 3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates. 4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut. 5. Develop operator set-up sheets for numerical control machines. 6. Develop flat pattern mylars and templates as required. 7. Produce 2-D Catia tool drawings as required. 8. May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions: 1. Assist in training and guiding lower level engineers as needed. 2. Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.

Other Requirements: 1. Excellent verbal and written communication skills required. 2. Strong knowledge of various machining and drafting methods, technical writing, and computer use. 3. Ability to read and interpret complex blueprints and engineering drawings. 4. Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function. 5. Must have demonstrated expertise and a proven track record in support of company policies and rules, and consistently meeting objectives.

Additional Information

Requisition Number: 141105

Department: J0403-Post Production Requirements

Number of Openings: 1.0

Please reference Avjobs when applying for this position.

Savannah Aircraft Technician II Service Center - Savannah GA

Savannah Aircraft Paint Prep Trainee - Savannah GA

Savannah Material Analyst Supply Logistics - Savannah GA

Savannah Avionics Installer Sr - Savannah GA

Savannah Advanced Composites Technician 1 - Savannah GA

Savannah Structural Mech I Multi Slots and Depts - Savannah GA

Savannah Pricing Analyst Sr - Savannah GA

Savannah Manufacturing Engineer II - Savannah GA

Savannah NDT Non Destructive Testing Tech II - Savannah GA

Savannah Cabinet Finisher II - Savannah GA

ONIT Aviation Services, founded in 1999 is growing steadily while maintaining the "Small Business Attitude" of doing "whatever it takes" to provide the best skilled and experienced technicians available at a competitive price. ONIT Aviation Services currently maintains a resume base operation made up of over 10,000 skilled technicians that have "Made the Cut". All Technicians working with the company are either personal acquaintances of the staff or Proven Technicians presently employed. Be assured that when you ask for techs from ONIT Aviation Services, you will receive the best qualified and motivated techs available, not just a warm body! As a Small Company your call is likely to be answered by our CEO/President, Jim Hillburn. Jim remains very deeply involved in all aspects of business here at ONIT Aviation Services. With over 30 years in Aviation Maintenance and Management, Jim is aware of, and familiar with, the daily concerns and needs of the Technicians and our customers. ONIT Aviation Services strives to provide the best positions available along with the most attractive pay packages. Check Our Job Openings! Positions Available Immediately!



Savannah Numerical Controls Engineer III

Location: Savannah GA

Industry: Aviation
Occupational Category: Engineering
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: ONIT Aviation Services Inc seeks a Savannah Numerical Controls Engineer III.

ONIT Aviation is seeking qualified Contract - NC Eng III - REQ# 141105 in GAC Savannah

FAA Regulated?: No

Unique Skills:

Strong 5-axis programming background in CATIA V5. Master Cam knowledge preferred. Vericut Knowledge preferred.

Education and Experience Requirements:

Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.

Position Purpose:
Under minimal supervision, perform activities related to complex numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Principle Duties and Responsibilities:
Essential Functions: 1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size. 2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan. 3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates. 4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut. 5. Develop operator set-up sheets for numerical control machines. 6. Develop flat pattern mylars and templates as required. 7. Produce 2-D Catia tool drawings as required. 8. May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions: 1. Assist in training and guiding lower level engineers as needed. 2. Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.

Other Requirements: 1. Excellent verbal and written communication skills required. 2. Strong knowledge of various machining and drafting methods, technical writing, and computer use. 3. Ability to read and interpret complex blueprints and engineering drawings. 4. Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function. 5. Must have demonstrated expertise and a proven track record in support of company policies and rules, and consistently meeting objectives.

Additional Information

Requisition Number: 141105

Department: J0403-Post Production Requirements

Number of Openings: 1.0

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2018-12-17

Please Apply by: 2019-1-2