ONIT Aviation Services Inc job details and career information

Savannah Manufacturing Engineer II Urgent

Location
Savannah, Georgia
Wage
Hourly
Job ID
AV2152219
Posted
2019-1-14


ONIT Aviation is seeking qualified Contract - Manufacturing Eng II - REQ# 140305 in GAC Savannah

FAA Regulated?: No

Unique Skills:

Preferred Experience in a Manufacturing or Mechanical Environment. Should have good communication and customer satisfaction skills. Required Experience with ERP or Manufacturing Planning Software and Microsoft Office Software. Preferred Manufacturing Planning experience.

Education and Experience Requirements:

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Additional Information

Requisition Number: 140305

Department: J0371-G650 Wing Assy OET

Number of Openings: 1.0

Please reference Avjobs when applying for this position.

Savannah RS Aircraft Technician Sr Service Center - Savannah GA

Savannah Manufacturing Engineer II Multiple Depts - Savannah GA

Savannah - Savannah GA

Savannah Structural Mech II Mult slots and depts - Savannah GA

Savannah Tool Design Engineer III Mult Slots Depts - Savannah GA

Savannah Sheetmetal Structural Ops Trainee Multipl - Savannah GA

Savannah Numerical Controls Engineer III - Savannah GA

Savannah Production Painter II - Savannah GA

Savannah Engineer Contractor 5 Electrical - Savannah GA

Savannah Avionics Electrical Tech II - Savannah GA

ONIT Aviation Services, founded in 1999 is growing steadily while maintaining the "Small Business Attitude" of doing "whatever it takes" to provide the best skilled and experienced technicians available at a competitive price. ONIT Aviation Services currently maintains a resume base operation made up of over 10,000 skilled technicians that have "Made the Cut". All Technicians working with the company are either personal acquaintances of the staff or Proven Technicians presently employed. Be assured that when you ask for techs from ONIT Aviation Services, you will receive the best qualified and motivated techs available, not just a warm body! As a Small Company your call is likely to be answered by our CEO/President, Jim Hillburn. Jim remains very deeply involved in all aspects of business here at ONIT Aviation Services. With over 30 years in Aviation Maintenance and Management, Jim is aware of, and familiar with, the daily concerns and needs of the Technicians and our customers. ONIT Aviation Services strives to provide the best positions available along with the most attractive pay packages. Check Our Job Openings! Positions Available Immediately!



Top Employeer ONIT Aviation Services Inc Jobs
Website
www.onitaviation.com/
Job Feed
View
News Feed
View
List All ONIT Aviation Services Inc Jobs

Don't wait, apply today.
We can't wait to receive your resume.

As of 1/19/2019, ONIT Aviation Services Inc is accepting resumes and actively recruiting for this Savannah Manufacturing Engineer II position in Savannah, Georgia. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Savannah Manufacturing Engineer II

Location: Savannah GA

Industry: Aviation
Occupational Category: Engineering
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: ONIT Aviation Services Inc seeks a Savannah Manufacturing Engineer II.

ONIT Aviation is seeking qualified Contract - Manufacturing Eng II - REQ# 140305 in GAC Savannah

FAA Regulated?: No

Unique Skills:

Preferred Experience in a Manufacturing or Mechanical Environment. Should have good communication and customer satisfaction skills. Required Experience with ERP or Manufacturing Planning Software and Microsoft Office Software. Preferred Manufacturing Planning experience.

Education and Experience Requirements:

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Additional Information

Requisition Number: 140305

Department: J0371-G650 Wing Assy OET

Number of Openings: 1.0

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2019-1-14

Please Apply by: 2019-1-30