ONIT Aviation Services Inc job details and career information

Savannah Sheetmetal Technician II Service Center Urgent

Location
Savannah, Georgia
Wage
Hourly
Job ID
AV2152244
Posted
2019-1-16


ONIT Aviation is seeking qualified Contract - RS Sheetmetal Tech II - Req# 137997 (SAV) in GAC Savannah

FAA Regulated?: Yes

Unique Skills:

Aircraft experience to layout, fabricate and install parts,

Education and Experience Requirements:

High School Diploma or GED required. Two (2) years experience of sheetmetal and/or fabrication experience.

Position Purpose:
The Sheetmetal Technician II works under general supervision to safely layout, fabricate and install parts, equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.

Principle Duties and Responsibilities:
Essential Functions: 1. Safely perform sheet-metal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft under general supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. 2. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents. 3. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information. 4. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheet-metal functions. Use the proper hardware for various sheetmetal applications. 5. Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment as required. Ensure aircraft interior is protected (PTP). 6. Assist in monthly 5S audits. 7. Use the material tracking system to create parts demand, track squawks and to sign-off work. 8. Assist in developing initiatives to meet individual OGSM requirements, as required.

Additional Functions: 1. Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.). 2. Properly use and maintain company-provided tools and equipment and returns items to tool room after use. 3. Ensure standard operating procedures are followed when operating ground support equipment. 4. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. 5. Ensure accurate daily job charging to the aircraft. 6. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership. 7. Assist in maintaining shop equipment and associated JSAs. Perform other duties as assigned.

Other Requirements: 1. A working knowledge of sheet-metal installation and fabrication processes (measuring, cutting, bending, forming, and drilling of aluminum sheet stock, angle and honeycomb) is required. 2. Ability to read and interpret blueprints and engineering documentation. 3. Valid drivers license required. to operate towing and other Gulfstream transportation equipment. 4. Ability to read, write, speak, and understand the English language. 5. Able to use tools and equipment associated with sheetmetal installation and fabrication work. 6. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 7. Must have a good working knowledge of computers and experience working with Microsoft Office suite.

Languages Required (in addition to English): [[cusLanguage]]

Additional Information

Requisition Number: 137997

Department: J0526-Service Center F Bay

Number of Openings: 2.0

Please reference Avjobs when applying for this position.

Savannah Manufacturing Engineer II Multiple Depts - Savannah GA

Savannah - Savannah GA

Savannah Structural Mech II Mult slots and depts - Savannah GA

Savannah Tool Design Engineer III Mult Slots Depts - Savannah GA

Savannah Sheetmetal Structural Ops Trainee Multipl - Savannah GA

Savannah Numerical Controls Engineer III - Savannah GA

Savannah Production Painter II - Savannah GA

Savannah Engineer Contractor 5 Electrical - Savannah GA

Savannah Avionics Electrical Tech II - Savannah GA

Savannah Final Line Mech II - Savannah GA

ONIT Aviation Services, founded in 1999 is growing steadily while maintaining the "Small Business Attitude" of doing "whatever it takes" to provide the best skilled and experienced technicians available at a competitive price. ONIT Aviation Services currently maintains a resume base operation made up of over 10,000 skilled technicians that have "Made the Cut". All Technicians working with the company are either personal acquaintances of the staff or Proven Technicians presently employed. Be assured that when you ask for techs from ONIT Aviation Services, you will receive the best qualified and motivated techs available, not just a warm body! As a Small Company your call is likely to be answered by our CEO/President, Jim Hillburn. Jim remains very deeply involved in all aspects of business here at ONIT Aviation Services. With over 30 years in Aviation Maintenance and Management, Jim is aware of, and familiar with, the daily concerns and needs of the Technicians and our customers. ONIT Aviation Services strives to provide the best positions available along with the most attractive pay packages. Check Our Job Openings! Positions Available Immediately!



Top Employeer ONIT Aviation Services Inc Jobs
Website
www.onitaviation.com/
Job Feed
View
News Feed
View
List All ONIT Aviation Services Inc Jobs

Don't wait, apply today.
We can't wait to receive your resume.

As of 1/19/2019, ONIT Aviation Services Inc is accepting resumes and actively recruiting for this Savannah Sheetmetal Technician II Service Center position in Savannah, Georgia. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Savannah Sheetmetal Technician II Service Center

Location: Savannah GA

Industry: Aviation
Occupational Category: Maintenance
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: ONIT Aviation Services Inc seeks a Savannah Sheetmetal Technician II Service Center.

ONIT Aviation is seeking qualified Contract - RS Sheetmetal Tech II - Req# 137997 (SAV) in GAC Savannah

FAA Regulated?: Yes

Unique Skills:

Aircraft experience to layout, fabricate and install parts,

Education and Experience Requirements:

High School Diploma or GED required. Two (2) years experience of sheetmetal and/or fabrication experience.

Position Purpose:
The Sheetmetal Technician II works under general supervision to safely layout, fabricate and install parts, equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.

Principle Duties and Responsibilities:
Essential Functions: 1. Safely perform sheet-metal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft under general supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. 2. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents. 3. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information. 4. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheet-metal functions. Use the proper hardware for various sheetmetal applications. 5. Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment as required. Ensure aircraft interior is protected (PTP). 6. Assist in monthly 5S audits. 7. Use the material tracking system to create parts demand, track squawks and to sign-off work. 8. Assist in developing initiatives to meet individual OGSM requirements, as required.

Additional Functions: 1. Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.). 2. Properly use and maintain company-provided tools and equipment and returns items to tool room after use. 3. Ensure standard operating procedures are followed when operating ground support equipment. 4. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. 5. Ensure accurate daily job charging to the aircraft. 6. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership. 7. Assist in maintaining shop equipment and associated JSAs. Perform other duties as assigned.

Other Requirements: 1. A working knowledge of sheet-metal installation and fabrication processes (measuring, cutting, bending, forming, and drilling of aluminum sheet stock, angle and honeycomb) is required. 2. Ability to read and interpret blueprints and engineering documentation. 3. Valid drivers license required. to operate towing and other Gulfstream transportation equipment. 4. Ability to read, write, speak, and understand the English language. 5. Able to use tools and equipment associated with sheetmetal installation and fabrication work. 6. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 7. Must have a good working knowledge of computers and experience working with Microsoft Office suite.

Languages Required (in addition to English): [[cusLanguage]]

Additional Information

Requisition Number: 137997

Department: J0526-Service Center F Bay

Number of Openings: 2.0

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2019-1-16

Please Apply by: 2019-2-1