TEL Staffing job details and career information

Contract Eng Contractor 5 Featured

Location
Savannah, Georgia
Wage
Hourly $72.00
Job ID
2691
Posted
2024-6-17
I'm Interested

Bachelor(s) Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 13 yrs specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job. Position Purpose: Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development Principle Duties and Responsibilities: Essential Functions: 1. Responsible for an entire engineering project of major complexity within established scope . 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities . 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge . 4. Leads the development of innovative principles and ideas . 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements . 6. Works under consultative direction; uses independent judgment to accomplish objectives . 7. Develops standards and guides for diverse engineering activities . 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program . Perform other duties as assigned. Other Requirements: 1. Advanced degree in engineering or related curriculum preferred The level of technical skill and abilities appropriate for this grade will be established by each discipline .


Comments

Qualified candidates will have:
- Thorough understanding of structures and mech system design criteria including design loads and durability (fatigue and corrosion)
- Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
- Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies

Preferred candidates will also have:
- Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Composite Part Design (CPD), FT&A, Kinematics, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
- Proficiency in SmarTeam PLM database
- Prior work experience with aircraft design

Responsibilities include:
- Maintain type design definition of the aircraft by producing the form, fit, and function documentation
- Engage various engineering, manufacturing and product support teams to complete designs
- Participate in design reviews - Prepare engineering reports and presentations
- Mentoring to junior engineers when required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: Advanced degree in engineering, or related curriculum preferred

The level of technical skill and abilities appropriate for this grade will be established by each discipline

Mfg Eng III Savannah GA

Stress Eng Contractor 5 Savannah GA

Structural Mechanic I Contract 217353 Savannah GA

Structural Mechanic I Contract 217354 Savannah GA

Mfg Eng II Savannah GA

Mfg Eng II Savannah GA

Mfg Eng II Savannah GA

Contract AvionicsElec Tech Sr Savannah GA

NC Eng III Savannah GA

Contract Final Line Mech II Req 214349 Savannah GA

TEL Staffing Inc is a full-service staffing agency which has provided quality staffing services for all industries for 10 years, to include our growing Aerospace Division. At TEL, we do our very best to provide the most qualified candidates for the open positions where the client's AND employee's satisfaction are our main goals.

I'm Interested

Top Employer TEL Staffing Jobs
Website
telstaffing.com/
Job Feed
View
News Feed
View
List All TEL Staffing Jobs

Don't wait, apply today.
We can't wait to receive your resume.

TEL Staffing is accepting resumes and actively recruiting for this Contract Eng Contractor 5 position in Savannah, Georgia. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Contract Eng Contractor 5

Location: Savannah GA 31408

Industry: Aviation
Occupational Category: Engineering
Hours: Full-time, 40 hours per week
Salary: USD 72

Description: TEL Staffing seeks a Contract Eng Contractor 5.

Bachelor(s) Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 13 yrs specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job. Position Purpose: Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development Principle Duties and Responsibilities: Essential Functions: 1. Responsible for an entire engineering project of major complexity within established scope . 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities . 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge . 4. Leads the development of innovative principles and ideas . 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements . 6. Works under consultative direction; uses independent judgment to accomplish objectives . 7. Develops standards and guides for diverse engineering activities . 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program . Perform other duties as assigned. Other Requirements: 1. Advanced degree in engineering or related curriculum preferred The level of technical skill and abilities appropriate for this grade will be established by each discipline .


Comments

Qualified candidates will have:
- Thorough understanding of structures and mech system design criteria including design loads and durability (fatigue and corrosion)
- Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
- Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies

Preferred candidates will also have:
- Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Composite Part Design (CPD), FT&A, Kinematics, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
- Proficiency in SmarTeam PLM database
- Prior work experience with aircraft design

Responsibilities include:
- Maintain type design definition of the aircraft by producing the form, fit, and function documentation
- Engage various engineering, manufacturing and product support teams to complete designs
- Participate in design reviews - Prepare engineering reports and presentations
- Mentoring to junior engineers when required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: Advanced degree in engineering, or related curriculum preferred

The level of technical skill and abilities appropriate for this grade will be established by each discipline

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2024-6-17

Please Apply by: 2024-7-3