US Army Reserve Command job details and career information

Sheet Metal Mechanic Hot

Location
Ft Hood, Texas
Wage
Hourly
Job ID
15525827106
Posted
2021-2-23

Summary

About the Position: This position is with the Army Reserve Aviation Command (ARAC) Aviation Support Facility (ASF) Hood West (Rotary Wing) Army Reserve Aviation Command located in Fort Hood Texas.

Responsibilities

Fabricates lays out forms and installs a variety of metal surfaces and structural members for aircraft.

Examines aircraft flying surfaces and supporting sheet metal structures to determine extent of repair using applicable technical manuals.

Removes damaged aircraft structural members and installs replacement members including beams and formers.

Plans and lays out work using applicable work practices for repair and modification of aircraft metal parts and components.

Requirements

Conditions of Employment

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesInteragency Career Transition Assistance PlanMilitary Spouses under Executive Order (E.O.) 13473Priority Placement Program DoD Military Spouse Preference (MSP) Eligible Experience refers to paid and unpaid experience including volunteer work done through National Service programs (e.g. Peace Corps AmeriCorps) and other organizations (e.g. professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience including volunteer experience. There is no specific length of training or experience required. However you must be able to demonstrate through experience shown in your written application materials that you possess the sufficient knowledge skills and abilities to successfully perform the work of this position without more than normal supervision. Minimum Qualifications (Screen Out Element): Ability to do the work of an Sheet Metal Mechanic (Aircraft) without more than normal supervision. Applicants must meet the screen out elements to be considered further. To meet the screen out elements applicants should document experience in the following: Assisting with plans and lay outs of work helping to determine repair work needed operating various shop equipment and helping to cut bend and form metal parts. - Failure to meet this Screen Out Element will result in an ineligible rating.

You will be evaluated on the basis of your level of competency (knowledge skills and abilities) in the following areas: Ability To Do The Work Of The Position Without More Than Normal Supervision (Screen-out Element)Ability to Interpret Instructions Specification etc. (includes blueprint reading)Ability to Use Hand Tools Power Tools etc. for Metal WorkKnowledge of Equipment Structure Materials etc. (includes constructing repair and forging)Layout and Pattern Development (includes Geometric Projection and Triangulation) Physical effort: Makes repairs from ladders scaffolds and toeboards and where parts worked on are in hard to reach places that require climbing standing stooping bending stretching and working in tiring and uncomfortable positions. Frequently lifts items that weigh up to 20 pounds and occasionally may lift and carry items up to 50 pounds. Working conditions: Works in well-lighted but noisy shop and outside subject to heat cold and inclement weather. There is continuous exposure to disagreeable odors smoke and fumes. Wears protective masks aprons and goggles. There are dangers of cuts falls burns and injuries from hand and power tools.

Education

Additional Information

Male applicants born after December 31 1959 must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. Two year trial/probationary period may be required. Direct deposit of pay is required. This is a Career Program (CP) 15 - Quality and Reliability Assurance position. You may claim military spouse preference (MSP). If a MSP applicant is determined best qualified and selected placement must be at the full performance level for priority consideration. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant see the information in the Reemployed Annuitant information sheet. Multiple positions may be filled from this announcement. Salary includes applicable locality pay. If you are unable to apply online or need to fax a document you do not have in electronic form view the following link for information regarding an Alternate Application. Payment of Permanent Change of Station (PCS) costs is not authorized based on a determination that a PCS move is not in the Government interest. Position may be filled as a temporary promotion temporary reassignment or temporary change to lower grade Not To Exceed 13 months by a current permanent Army employee. Temporary promotions reassignments or change to lower grades may be extended up to a maximum of five years and may be made permanent without further competition. Position may be filled as a term appointment Not To Exceed 13 months if the candidate is not a current permanent Army employee. Term appointments may be extended up to a maximum of six years.

Aircraft Mechanic Ii Ch 47 Ft Hood TX

Aircraft Mechanic I Mwo Travel Team Ft Hood TX

Vc 25b Electrical Aircraft Mechanic Universal City TX

Aircraft Mechanic Georgetown TX

Vc 25b Aircraft Mechanic Structures La Coste TX

T 38 Aircraft Mechanic Iii Non Destructive Inspection Randolph Afb TX

Aerospace Mechanical Engineer Greenville TX

Aircraft Sheet Metal Technician Grand Prairie TX

Aircraft Mechanic I El Paso TX

Electrical Sheet Metal Instructor San Antonio TX

The following jobs have been promoted on the Aviation Ad Network and are to be considered - current, newsworthy aviation employment information (FYI). No guarantee is made as to the accuracy, completeness or timeliness of any information, projections or opinions in announcements obtained through the promoted jobs. The information contained in this announcement is compiled for the convenience of site visitors and is accepted by the site visitor on the condition that errors or omissions are not the responsibility of Avjobs and shall not be made the basis for any claim, demand or cause of action. Please visit this companys web site for additional details and information. Please reference Avjobs when applying.

Top Employer US Army Reserve Command Jobs
Website
www.avjobs.com/companies
Job Feed
View
News Feed
View
List All US Army Reserve Command Jobs

Don't wait, apply today.
We can't wait to receive your resume.

US Army Reserve Command is accepting resumes and actively recruiting for this Sheet Metal Mechanic position in Ft Hood, Texas. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Sheet Metal Mechanic

Location: Ft Hood TX

Industry: Aviation
Occupational Category: AP Mechanic
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: US Army Reserve Command seeks a Sheet Metal Mechanic.

Summary

About the Position: This position is with the Army Reserve Aviation Command (ARAC) Aviation Support Facility (ASF) Hood West (Rotary Wing) Army Reserve Aviation Command located in Fort Hood Texas.

Responsibilities

Fabricates lays out forms and installs a variety of metal surfaces and structural members for aircraft.

Examines aircraft flying surfaces and supporting sheet metal structures to determine extent of repair using applicable technical manuals.

Removes damaged aircraft structural members and installs replacement members including beams and formers.

Plans and lays out work using applicable work practices for repair and modification of aircraft metal parts and components.

Requirements

Conditions of Employment

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesInteragency Career Transition Assistance PlanMilitary Spouses under Executive Order (E.O.) 13473Priority Placement Program DoD Military Spouse Preference (MSP) Eligible Experience refers to paid and unpaid experience including volunteer work done through National Service programs (e.g. Peace Corps AmeriCorps) and other organizations (e.g. professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience including volunteer experience. There is no specific length of training or experience required. However you must be able to demonstrate through experience shown in your written application materials that you possess the sufficient knowledge skills and abilities to successfully perform the work of this position without more than normal supervision. Minimum Qualifications (Screen Out Element): Ability to do the work of an Sheet Metal Mechanic (Aircraft) without more than normal supervision. Applicants must meet the screen out elements to be considered further. To meet the screen out elements applicants should document experience in the following: Assisting with plans and lay outs of work helping to determine repair work needed operating various shop equipment and helping to cut bend and form metal parts. - Failure to meet this Screen Out Element will result in an ineligible rating.

You will be evaluated on the basis of your level of competency (knowledge skills and abilities) in the following areas: Ability To Do The Work Of The Position Without More Than Normal Supervision (Screen-out Element)Ability to Interpret Instructions Specification etc. (includes blueprint reading)Ability to Use Hand Tools Power Tools etc. for Metal WorkKnowledge of Equipment Structure Materials etc. (includes constructing repair and forging)Layout and Pattern Development (includes Geometric Projection and Triangulation) Physical effort: Makes repairs from ladders scaffolds and toeboards and where parts worked on are in hard to reach places that require climbing standing stooping bending stretching and working in tiring and uncomfortable positions. Frequently lifts items that weigh up to 20 pounds and occasionally may lift and carry items up to 50 pounds. Working conditions: Works in well-lighted but noisy shop and outside subject to heat cold and inclement weather. There is continuous exposure to disagreeable odors smoke and fumes. Wears protective masks aprons and goggles. There are dangers of cuts falls burns and injuries from hand and power tools.

Education

Additional Information

Male applicants born after December 31 1959 must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. Two year trial/probationary period may be required. Direct deposit of pay is required. This is a Career Program (CP) 15 - Quality and Reliability Assurance position. You may claim military spouse preference (MSP). If a MSP applicant is determined best qualified and selected placement must be at the full performance level for priority consideration. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant see the information in the Reemployed Annuitant information sheet. Multiple positions may be filled from this announcement. Salary includes applicable locality pay. If you are unable to apply online or need to fax a document you do not have in electronic form view the following link for information regarding an Alternate Application. Payment of Permanent Change of Station (PCS) costs is not authorized based on a determination that a PCS move is not in the Government interest. Position may be filled as a temporary promotion temporary reassignment or temporary change to lower grade Not To Exceed 13 months by a current permanent Army employee. Temporary promotions reassignments or change to lower grades may be extended up to a maximum of five years and may be made permanent without further competition. Position may be filled as a term appointment Not To Exceed 13 months if the candidate is not a current permanent Army employee. Term appointments may be extended up to a maximum of six years.

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2021-2-23

Please Apply by: 2021-3-11