ONIT Aviation Services Inc job details and career information

Savannah Engineer Contractor 5 Electrical Featured

Location
Savannah, Georgia
Wage
Hourly
Job ID
AV2152229
Posted
2018-12-13


ONIT Aviation is seeking qualified Contract - Aircraft Electrical Engineer Contractor 5 - REQ# 141428 in GAC Savannah

FAA Regulated?: No

Unique Skills:

1) AutoCad required Catia V5 preferred 2) Gulfstream Completions electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred. 8) Familiarity with aircraft STC procedures preferred.

Education and Experience Requirements:

Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
Essential Functions: 1. Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline
.

Additional Information

Requisition Number: 141428

Department: J1346-CENG Electrical

Number of Openings: 1.0

Please reference Avjobs when applying for this position.

Savannah Numerical Controls Engineer III - Savannah GA

Savannah Avionics Electrical Tech II - Savannah GA

Savannah Production Painter II - Savannah GA

Savannah Aircraft Technician II - Savannah GA

Savannah Sheetmetal Technician II Service Center - Savannah GA

Savannah Tooling Inspect Sr - Savannah GA

Savannah Manufacturing Engineer II - Savannah GA

Savannah Aircraft Painter II - Savannah GA

Savannah Avionics Electrical Tech Sr - Savannah GA

Savannah Structural Mech I Multi Slots and Depts - Savannah GA

ONIT Aviation Services, founded in 1999 is growing steadily while maintaining the "Small Business Attitude" of doing "whatever it takes" to provide the best skilled and experienced technicians available at a competitive price. ONIT Aviation Services currently maintains a resume base operation made up of over 10,000 skilled technicians that have "Made the Cut". All Technicians working with the company are either personal acquaintances of the staff or Proven Technicians presently employed. Be assured that when you ask for techs from ONIT Aviation Services, you will receive the best qualified and motivated techs available, not just a warm body! As a Small Company your call is likely to be answered by our CEO/President, Jim Hillburn. Jim remains very deeply involved in all aspects of business here at ONIT Aviation Services. With over 30 years in Aviation Maintenance and Management, Jim is aware of, and familiar with, the daily concerns and needs of the Technicians and our customers. ONIT Aviation Services strives to provide the best positions available along with the most attractive pay packages. Check Our Job Openings! Positions Available Immediately!



Savannah Engineer Contractor 5 Electrical

Location: Savannah GA

Industry: Aviation
Occupational Category: Engineering
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: ONIT Aviation Services Inc seeks a Savannah Engineer Contractor 5 Electrical.

ONIT Aviation is seeking qualified Contract - Aircraft Electrical Engineer Contractor 5 - REQ# 141428 in GAC Savannah

FAA Regulated?: No

Unique Skills:

1) AutoCad required Catia V5 preferred 2) Gulfstream Completions electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred. 8) Familiarity with aircraft STC procedures preferred.

Education and Experience Requirements:

Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
Essential Functions: 1. Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline
.

Additional Information

Requisition Number: 141428

Department: J1346-CENG Electrical

Number of Openings: 1.0

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2018-12-13

Please Apply by: 2018-12-29