Shelbyville, KY
Aerospace Machining Operator Saws BENDers Cnc Setup Business Operations Shelbyville KY KENTUCKY voestalpine Roll Forming Corporation United States 36184177981
2026-7-7
St Charles, MO
eful grasping, Occasional (1-3 Hrs) Requires lifting, pushing, pulling, and supporting up to 35lbs, BENDing at the waist, kneeling, crouching, squatting, reaching. The position may have frequent (3-6 hrs) exposure to Noise. Exposure to noise, moving parts and occasional exposure to high/exposed places. Frequent lifting, pushing, pulling up to 35 lbs. Frequent standing, reaching, handling, and turning. Working on elevated and/or uneven surfaces. This position requires eye, hearing and other personal protective equipment, frequent (up to 8 hours) of standing, occasional (1-3 Hrs
2026-7-8
Ft Worth, TX
5’0” to 6’0” without shoes Must be physically able to perform tasks that require frequent walking BENDing below ankle level and reaching above shoulder level; open emergency exits and close aircraft doors weighing up to 45 pounds; push and pull beverage cart weighing up to 250 pounds; and lift store transport and reach for items with or without reasonable accommodation Corrected vision should not exceed 20/40 Normal or corrected hearing range within 15-17kHZ Overall appearance must be professional neat and clean No extreme hair styles or colors are permitted Single
2026-7-8
Hazelwood, MO
) applicable to the testing method being used. Able and willing to stand 90% of the time, stoop, BEND, stretch, and engage in awkward positioning. Able to lift up to 35 lbs. Position Responsibilities : Performs setup for specialized non-destructive test or measurement equipment. Develops procedures and processes. Performs tests or inspections and collects data. Documents, analyzes and communicates results and assists with corrective action recommendations. Provides feedback on adverse trends. Responsible for non-destructive testing and acceptance
2026-7-8
Hazelwood, MO
within indoor and outdoor environments Ability to perform physical activities such as climbing, BENDing, kneeling and lifting Ability to climb ladders at heights up to 15 feet and stairs on a regular basis Ability to lift up to 35 pounds Willing and able to work in confined spaces Preferred Qualifications (Desired Skills/Experience): Bachelors degree or equivalent work or military experience KMI Schoolhouse training completion certificate Security Certification 3 years of experience communicating with internal and external customers 3 ye
2026-7-8
Berkeley, MO
st in tool tryout. Make up production aids such as fillers, shims and pads. Scribe reference lines, BEND lines and points on parts; setup; fabricate, stress relieve; hot form; hand form to specified tolerances performed reverse and compound contours such as hat assemblies, webs, spars or where corrective forming affects other dimensions so as to require interrelating the forming of a number of surfaces such as doors, leading edges, channels and panels, parts such as brackets, angles, zees, caps and webs. Tap, ream, grind, assemble, fit, setup and alignment of parts in jigs or
2026-7-8
Berkeley, MO
) applicable to the testing method being used. Able and willing to stand 90% of the time, stoop, BEND, stretch, and engage in awkward positioning. Able to lift up to 35 lbs. Position Responsibilities: Guides the development, implementation, or improvement of non-destructive inspection or test techniques. Develops, deploys and implements tests or inspections and data collection techniques utilizing evolving technology. Develops program specific non-destructive testing documents. Has the skills and knowledge to interpret codes, standards, and other cont
2026-7-8
Berkeley, MO
eful grasping, Occasional (1-3 Hrs) Requires lifting, pushing, pulling, and supporting up to 35lbs, BENDing at the waist, kneeling, crouching, squatting, reaching. The position may have frequent (3-6 hrs) exposure to Noise. Exposure to noise, hazardous chemicals, moving parts and occasional exposure to high/exposed places. Frequent lifting, pushing, pulling up to 35 lbs. Frequent standing, reaching, handling, and turning. Working on elevated and/or uneven surfaces. This position requires eye, hearing and other personal protective equipment, frequent (up to 8 hours) of standing
2026-7-8
Berkeley, MO
) applicable to the testing method being used. Able and willing to stand 90% of the time, stoop, BEND, stretch, and engage in awkward positioning. Able to lift up to 35 lbs. Position Responsibilities: Guides the development, implementation, or improvement of non-destructive inspection or test techniques. Develops, deploys and implements tests or inspections and data collection techniques utilizing evolving technology. Develops program specific non-destructive testing documents. Has the skills and knowledge to interpret codes, standards, and other cont
2026-7-8
Berkeley, MO
eful grasping, Occasional (1-3 Hrs) Requires lifting, pushing, pulling, and supporting up to 35lbs, BENDing at the waist, kneeling, crouching, squatting, reaching. The position may have frequent (3-6 hrs) exposure to Noise. Exposure to noise, hazardous chemicals, moving parts and occasional exposure to high/exposed places. Frequent lifting, pushing, pulling up to 35 lbs. Frequent standing, reaching, handling, and turning. Working on elevated and/or uneven surfaces. This position requires eye, hearing and other personal protective equipment, frequent (up to 8 hours) of standing
2026-7-8
Free Aviation Jobs Newsletter
2026-7-8
Public search utility limited to 10 most recent results. Please sign in or
register to view all search results & apply.
Aviation Job Search