DynCorp International job details and career information

Aircraft Mechanic Iii Swb 1st Shift Hot

Location
Marana, Arizona
Wage
Hourly
Job ID
12262004800
Posted
2020-9-16

Job SummaryThe Aircraft Mechanic III (UH-60) maintains repairs and modifies aircraft structures structural components and engines of complex to extreme difficulty.Principal Accountabilities(Typical duties include the following although specific duties vary by assignment or contract) Maintains and repairs aircraft components including but not limited to flight controls engines hydraulics pneumatics fuel systems and mechanical components. Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. Removes and installs aircraft subsystem assemblies and components such as engines rotors transmissions mechanical flight controls and their components. Services and lubricates aircraft and subsystems. Safely prepares aircraft for inspections and maintenance checks and services. Performs scheduled inspections and assists in performing special inspections. Performs limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Uses and performs operator maintenance on tools special tools and aircraft ground support equipment. Applies comprehensive technical expertise to solve moderate problems by interpreting technical documentation such as aircraft Technical Manuals Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Uses a thorough knowledge of aircraft mechanical component troubleshooting repair procedures and replacement of parts. Uses a knowledge of electrical theory and of aircraft unique tools such as test equipment torque wrenches dial indicators micrometers sheet metal brakes and sheers. Participates in maintenance test flights and operation checks as required. Uses a working knowledge of technical publications and the Government STAMIS to make entries in aircraft logs and records. Receives technical assistance as required from higher-level technician. Prioritize workloads and is required to lead teams through more complex aircraft relevant tasks. Inspect all required aeronautical type maintenance to be performed by Aircraft Mechanic I and II. Inspect all aircraft assigned. Plans conducts and supervises aircraft technical inspections. Computes basic weight and balance records. Participates in maintenance test flights and operation checks as required. Ensures compliance with aircraft configuration control Army oil analysis Program and test measuring diagnostic equipment calibration. Provides guidance to lower level technicians in aircraft repair technical inspection techniques and procedures according to directives technical manuals work standards and operational policies. Prepares evaluations special reports and records pertaining to aircraft maintenance repair and related activities. When assigned to operate Flexible Engine Diagnostic System (FEDS). Shall have Federal Aviation Administration (FAA) Powerplant License. If no FAA Powerplant License then shall have minimum five years documented as a Flexible Engine Diagnostic System (FEDS) operator. When designated shall obtain DoD EPA Refrigerant Processing Certificate Section 608 Technician Certification (Universal) or Minimum Type II. If assigned all Weight and Balance Personnel Shall be trained according to AR 95-1. When qualified may be designated as an additional duty safety officer and or site safety specialist (SSS as a primary duty). May be designated as a Foreign Object Elimination/Foreign Object Debris (FOE/FOD) Program Administrator. As qualified and when required can perform non-crew member duties. When qualified and as assigned for crane operator duties shall have three years of crane operation related experience and shall comply with Occupational Safety and Health Administration (OSHA) 1926 Safety and Health Regulations for Construction Subpart: CC Cranes and Derricks in Construction 1926.1427 Operator qualification and Certification. When selected qualified and trained IAW contact requirements will perform aircraft condition evaluations (ACE) inspection duties. As required capable of using Respiratory Protective Equipment (RPE) for job duties. May support AS9100-AS9110 internal audits corrective action requests assist section department and/or program in developing plans to correct identified shortfalls. May assist with continual improvement initiatives. Perform other qualified duties as assignedKnowledge and Skills Proficient in the use of the Government STAMIS used to maintain Army aircraft forms and records. Thorough knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components. Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. Detailed knowledge of aircraft unique tools such as test equipment torque wrenches dial indicators micrometers cable tensiometers sheet metal brakes and sheers etc. Able to prioritize workload to maintain schedules on assigned projects. Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike. Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. Basic computer data entry skills required for use of maintenance and logistics databases. Shall possess the level of experience necessary to inspect all required aeronautical type maintenance to be performed by skill class Mechanic I and must have a combination of experience to repair engines sheet metal structural hydraulic electrical power train and general mechanical maintenance of moderate difficulty required to meet the assigned missions. Shall have a thorough knowledge of aircraft mechanical component troubleshooting diagnosing problems repair procedures and replacement of parts: requires broad knowledge of aircraft sheet metal/structural modifications and repair. Shall have basic knowledge of electrical theory. Shall have thorough knowledge of aircraft unique tools such as test equipment torque wrenches dial indicators micrometers sheet metal brakes and sheers. Shall have a working knowledge of making entries in aircraft logbooks and records military technical publications and the Armys Unit Level Logistics Aviation Information System ULLS-AE. Shall have a thorough knowledge of aircraft sheet metal and structural modification and repair. Shall have the ability to determine functionality of non-complex electrical systems. Shall have a detailed knowledge of aircraft unique tools such as cable tensiometers. All mechanics assigned to perform maintenance on FAA certified aircraft must meet FAA requirements When assigned to Engine Specialized Repair Activity must hold a valid (current) FAA Powerplant license. Must be able to type using a standard keyboard to communicate through e-mail and software applications. Ability to communicate effectively both verbally and in writing in English.Experience and Education Completion of high school or equivalent and U.S. military technical school or specialized training course is desired certification of education level is required. Valid up-to-date A&P license preferred; (5) five years aviation maintenance experience (5) five years rotary wing aircraft experience consisting of (2) two years on the assigned MDS is required. All experience must be within the (10) ten most recent years is required.Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs ramps ladders and work stands. Must be able to crouch crawl grasp or handle objects use finger dexterity bend elbow/knee and reach above/below shoulders. May be required to lift heavy objects whose weight may exceed 50 pounds. Will be required to handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test qualification. May be required to operate power vehicles machinery hand tools ground support equipment fork lift etc. Must be able to lift/push/pull minimum of 50 pounds. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty noisy and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.Travel May be required to travel domestically and internationally on short notice to austere environments under harsh living conditions.

15g Aircraft Structural Repairer Marana AZ

Aircraft Mechanic Iii Marana AZ

Aircraft Storage Mechanics Marana AZ

15g Aircraft Structural Repairer Marana AZ

Avionics Mechanic Red Rock AZ

Aircraft Line Maintenance Mechanics Higley AZ

Aircraft Maintenance Technician Pga Page AZ

Aircraft Maintenance Technician Pga Page AZ

Aircraft Maintenance Technician Pga Page AZ

Aircraft Line Maintenance Mechanics Arizona City AZ

The following jobs have been promoted on the Aviation Ad Network and are to be considered - current, newsworthy aviation employment information (FYI). No guarantee is made as to the accuracy, completeness or timeliness of any information, projections or opinions in announcements obtained through the promoted jobs. The information contained in this announcement is compiled for the convenience of site visitors and is accepted by the site visitor on the condition that errors or omissions are not the responsibility of Avjobs and shall not be made the basis for any claim, demand or cause of action. Please visit this companys web site for additional details and information. Please reference Avjobs when applying.

Top Employer DynCorp International Jobs
Website
www.avjobs.com/companies
Job Feed
View
News Feed
View
List All DynCorp International Jobs

Don't wait, apply today.
We can't wait to receive your resume.

DynCorp International is accepting resumes and actively recruiting for this Aircraft Mechanic Iii Swb 1st Shift position in Marana, Arizona. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Aircraft Mechanic Iii Swb 1st Shift

Location: Marana AZ

Industry: Aviation
Occupational Category: AP Mechanic
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: DynCorp International seeks a Aircraft Mechanic Iii Swb 1st Shift.
Job SummaryThe Aircraft Mechanic III (UH-60) maintains repairs and modifies aircraft structures structural components and engines of complex to extreme difficulty.Principal Accountabilities(Typical duties include the following although specific duties vary by assignment or contract) Maintains and repairs aircraft components including but not limited to flight controls engines hydraulics pneumatics fuel systems and mechanical components. Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. Removes and installs aircraft subsystem assemblies and components such as engines rotors transmissions mechanical flight controls and their components. Services and lubricates aircraft and subsystems. Safely prepares aircraft for inspections and maintenance checks and services. Performs scheduled inspections and assists in performing special inspections. Performs limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Uses and performs operator maintenance on tools special tools and aircraft ground support equipment. Applies comprehensive technical expertise to solve moderate problems by interpreting technical documentation such as aircraft Technical Manuals Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Uses a thorough knowledge of aircraft mechanical component troubleshooting repair procedures and replacement of parts. Uses a knowledge of electrical theory and of aircraft unique tools such as test equipment torque wrenches dial indicators micrometers sheet metal brakes and sheers. Participates in maintenance test flights and operation checks as required. Uses a working knowledge of technical publications and the Government STAMIS to make entries in aircraft logs and records. Receives technical assistance as required from higher-level technician. Prioritize workloads and is required to lead teams through more complex aircraft relevant tasks. Inspect all required aeronautical type maintenance to be performed by Aircraft Mechanic I and II. Inspect all aircraft assigned. Plans conducts and supervises aircraft technical inspections. Computes basic weight and balance records. Participates in maintenance test flights and operation checks as required. Ensures compliance with aircraft configuration control Army oil analysis Program and test measuring diagnostic equipment calibration. Provides guidance to lower level technicians in aircraft repair technical inspection techniques and procedures according to directives technical manuals work standards and operational policies. Prepares evaluations special reports and records pertaining to aircraft maintenance repair and related activities. When assigned to operate Flexible Engine Diagnostic System (FEDS). Shall have Federal Aviation Administration (FAA) Powerplant License. If no FAA Powerplant License then shall have minimum five years documented as a Flexible Engine Diagnostic System (FEDS) operator. When designated shall obtain DoD EPA Refrigerant Processing Certificate Section 608 Technician Certification (Universal) or Minimum Type II. If assigned all Weight and Balance Personnel Shall be trained according to AR 95-1. When qualified may be designated as an additional duty safety officer and or site safety specialist (SSS as a primary duty). May be designated as a Foreign Object Elimination/Foreign Object Debris (FOE/FOD) Program Administrator. As qualified and when required can perform non-crew member duties. When qualified and as assigned for crane operator duties shall have three years of crane operation related experience and shall comply with Occupational Safety and Health Administration (OSHA) 1926 Safety and Health Regulations for Construction Subpart: CC Cranes and Derricks in Construction 1926.1427 Operator qualification and Certification. When selected qualified and trained IAW contact requirements will perform aircraft condition evaluations (ACE) inspection duties. As required capable of using Respiratory Protective Equipment (RPE) for job duties. May support AS9100-AS9110 internal audits corrective action requests assist section department and/or program in developing plans to correct identified shortfalls. May assist with continual improvement initiatives. Perform other qualified duties as assignedKnowledge and Skills Proficient in the use of the Government STAMIS used to maintain Army aircraft forms and records. Thorough knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components. Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. Detailed knowledge of aircraft unique tools such as test equipment torque wrenches dial indicators micrometers cable tensiometers sheet metal brakes and sheers etc. Able to prioritize workload to maintain schedules on assigned projects. Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike. Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. Basic computer data entry skills required for use of maintenance and logistics databases. Shall possess the level of experience necessary to inspect all required aeronautical type maintenance to be performed by skill class Mechanic I and must have a combination of experience to repair engines sheet metal structural hydraulic electrical power train and general mechanical maintenance of moderate difficulty required to meet the assigned missions. Shall have a thorough knowledge of aircraft mechanical component troubleshooting diagnosing problems repair procedures and replacement of parts: requires broad knowledge of aircraft sheet metal/structural modifications and repair. Shall have basic knowledge of electrical theory. Shall have thorough knowledge of aircraft unique tools such as test equipment torque wrenches dial indicators micrometers sheet metal brakes and sheers. Shall have a working knowledge of making entries in aircraft logbooks and records military technical publications and the Armys Unit Level Logistics Aviation Information System ULLS-AE. Shall have a thorough knowledge of aircraft sheet metal and structural modification and repair. Shall have the ability to determine functionality of non-complex electrical systems. Shall have a detailed knowledge of aircraft unique tools such as cable tensiometers. All mechanics assigned to perform maintenance on FAA certified aircraft must meet FAA requirements When assigned to Engine Specialized Repair Activity must hold a valid (current) FAA Powerplant license. Must be able to type using a standard keyboard to communicate through e-mail and software applications. Ability to communicate effectively both verbally and in writing in English.Experience and Education Completion of high school or equivalent and U.S. military technical school or specialized training course is desired certification of education level is required. Valid up-to-date A&P license preferred; (5) five years aviation maintenance experience (5) five years rotary wing aircraft experience consisting of (2) two years on the assigned MDS is required. All experience must be within the (10) ten most recent years is required.Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs ramps ladders and work stands. Must be able to crouch crawl grasp or handle objects use finger dexterity bend elbow/knee and reach above/below shoulders. May be required to lift heavy objects whose weight may exceed 50 pounds. Will be required to handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test qualification. May be required to operate power vehicles machinery hand tools ground support equipment fork lift etc. Must be able to lift/push/pull minimum of 50 pounds. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty noisy and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.Travel May be required to travel domestically and internationally on short notice to austere environments under harsh living conditions.

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2020-9-16

Please Apply by: 2020-10-2