Kay job details and career information

Aircraft Mechanic I Featured

Location
Camp Pendleton, California
Wage
Hourly
Job ID
23420315332
Posted
2022-5-13

TASK DESCRIPTION: Aircraft Mechanic I (23021):

Aircraft Mechanics I must have a combination of experience to repair engines sheet metal structural hydraulic electrical power train and general mechanical maintenance of moderate difficulty required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure landing gear flight surfaces and controls anti-icing pneudraulic engines auxiliary power unit and ventilation and heating systems. This mechanic repairs replaces and rebuilds aircraft structures such as wings and fuselage and functional components including rigging surface controls and plumbing and hydraulic units using hand tools power tools machines and equipment such as shears sheet metal brake welding equipment rivet gun and drills. This worker reads and interprets manufacturers and airlines maintenance manuals service bulletins technical data engineering data and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Work involves replacing or repairing worn or damaged components such as carburetors alternators magnetos fuel controls fuel pumps oil pumps and engine mounted gearboxes and compressor bleed valves using hand tools gauges and testing equipment; removing engine from aircraft using hoist or forklift truck disassembling and inspecting parts for wear cracks security or other defects and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts repairs or replaces electrical wiring system and aircraft accessories performs preflight thru-flight and post-flight maintenance inspections performs miscellaneous duties to service aircraft including flushing crankcase cleaning screens and filters greasing moving parts and checking brakes. Supervises the jacking and towing of aircraft enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily service engines and airframe components at line station making repairs short of overhaul required to keep aircraft in safe operating condition specialize in work repair and modification of structural precision and functional spare parts and assemblies and specialize in engine repair. May be required to be licensed by Federal Aviation Administration. May require specialization in sheet-metal electric work avionics or other aircraft systems related disciplines.

Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below:

Airframe/Structural Corrosion Landing Gear Wing/Pylon Fold Hydraulic/Pneumatic and mechanical Flight Control Systems

Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions disassembles inspects evaluates and accomplishes necessary repairs lays out work according to technical instructions and technical directives. Determines what repairs modifications and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform.

Task Requirements:

  • Performs aircraft maintenance functions of the Line Corrosion Control and Aircraft Organizational Level maintenance
  • Scheduled and unscheduled maintenance support for assigned H-1 aircraft
  • Performs inspection disassembly repair servicing TD compliance modification assembly surface finish removal corrosion control preservation/de-preservation
  • Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in the activities plan and daily flight schedule
  • Aircraft maintenance action documentation via logs records forms and electronic means
  • Troubleshoot malfunctions in aircraft structure flight surfaces and controls anti-icing pneudraulic engines auxiliary power unit and ventilation and heating systems
  • Use hand tools power tools machines specific and general aviation test measurement and diagnostic equipment and sets kits and outfits (SKO).
  • Inspect repair replace and rebuild aircraft components/sub components to include rigging of flight control.
  • Read and interpret manufacturers maintenance manuals military technical manuals service bulletins technical data engineering data blueprints manufacturers drawings and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
  • Flight Line operations/functions at detachment locations as required
  • Confined space operations to include fuel cell entry
  • Support Equipment (SE) operation and inspections
  • Aircraft launch and recovery
  • Aircraft inspections
  • Aircraft movement
  • Support services
  • General aircraft maintenance
  • Technical Directive compliance and modifications
  • Maintain Aircraft Engines and SE Logbooks
  • Perform general housekeeping and organization of workstation(s) shop(s) maintenance facility to provide a clean safe and FOD free environment
  • Perform shift work and/or overtime as required
  • Perform phase scheduled unscheduled periodic and other hourly or calendar inspections.
  • Perform preflight thru flight and post-flight maintenance inspections launch and recover aircraft and Preventive Maintenance Daily Inspections.
  • Requisition repair parts materials and consumable supplies through military supply system.
  • Other tasks as directed

Preferred Qualifications:

  • Three or more years H-1 rotary wing experience
  • Five or more years rotary wing maintenance experience
  • Cadmium Plating qualified
  • Qualified to certify H-1 aircraft Safe-for-Flight
  • Naval Aviation Maintenance Control Management course (C-555-0053)
  • Collateral Duty Quality Assurance Representative (CDQAR) for Airframes Power Plants and Electrical Systems
  • Collateral Duty Inspector (CDI) for Line Corrosion Control and Avionics Systems
  • Quality Assurance Safety Observer (QASO)
  • Ammunition and Explosive handling qualifications
  • Vibration Analysis Operator / Interpreter
  • Tire and Wheel
  • Hydraulic Contamination
  • Plane Captain
  • Paint Final Finish Insignia (N-701-001) and Aircraft Corrosion (N-701-0013)

Basic Qualifications:

  • Individual (I) Aircraft Maintenance Qualification
  • Two years aviation maintenance experience
  • Must achieve Collateral Duty Inspector (CDI) AH-1Z and UH-1Y designation for DOL Skill within 90 days of hire
  • Must be able to work 1st 2nd 3rd and Weekend shift as required
  • Must be able to work flexible schedule Mon-Fri Sun-Thur and Fri-Mon as required
  • Must be able to pass background check
  • Must be able to obtain favorable National Agency Check with Written Inquires (NACI) IAW DTM-08-003 "Next Generation Common Access Card (CAC) Implementation Guidance or Secret security clearance as required for the position
  • Must be able to climb ladders raised platforms and aircraft
  • Must be able to use hand and power tools
  • Must have dexterity to handle small parts
  • Must be able to deploy to support off station exercises and perform other support duties if required

Employment is contingent on a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; (d) your ability to provide proof of COVID vaccination status (e) your ability to get a required clearance by your effective start date if needed and (f) KAI commencing performance on this contract.

Aircraft Worker Camp Pendleton CA

1516 Aviation Command Control Systems Analyst Camp Pendleton CA

Customer Service ground Operations Agent Stockton CA

Packer Flight Checker Gardena CA

Construction Inspector aviation Antioch CA

Aircraft Ground Support Paso Robles CA

Director Of Aircraft Maintenance Madera CA

Flight Attendant Merced CA

Flight Attendant Mather CA

Oda Administrator Chula Vista CA

The following jobs have been promoted on the Aviation Ad Network and are to be considered - current, newsworthy aviation employment information (FYI). No guarantee is made as to the accuracy, completeness or timeliness of any information, projections or opinions in announcements obtained through the promoted jobs. The information contained in this announcement is compiled for the convenience of site visitors and is accepted by the site visitor on the condition that errors or omissions are not the responsibility of Avjobs and shall not be made the basis for any claim, demand or cause of action. Please visit this companys web site for additional details and information. Please reference Avjobs when applying.

Top Employer Kay Jobs
Website
www.avjobs.com/companies
Job Feed
View
News Feed
View
List All Kay Jobs

Don't wait, apply today.
We can't wait to receive your resume.

Kay is accepting resumes and actively recruiting for this Aircraft Mechanic I position in Camp Pendleton, California. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Aircraft Mechanic I

Location: Camp Pendleton CA

Industry: Aviation
Occupational Category: AP Mechanic
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: Kay seeks a Aircraft Mechanic I.

TASK DESCRIPTION: Aircraft Mechanic I (23021):

Aircraft Mechanics I must have a combination of experience to repair engines sheet metal structural hydraulic electrical power train and general mechanical maintenance of moderate difficulty required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure landing gear flight surfaces and controls anti-icing pneudraulic engines auxiliary power unit and ventilation and heating systems. This mechanic repairs replaces and rebuilds aircraft structures such as wings and fuselage and functional components including rigging surface controls and plumbing and hydraulic units using hand tools power tools machines and equipment such as shears sheet metal brake welding equipment rivet gun and drills. This worker reads and interprets manufacturers and airlines maintenance manuals service bulletins technical data engineering data and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Work involves replacing or repairing worn or damaged components such as carburetors alternators magnetos fuel controls fuel pumps oil pumps and engine mounted gearboxes and compressor bleed valves using hand tools gauges and testing equipment; removing engine from aircraft using hoist or forklift truck disassembling and inspecting parts for wear cracks security or other defects and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts repairs or replaces electrical wiring system and aircraft accessories performs preflight thru-flight and post-flight maintenance inspections performs miscellaneous duties to service aircraft including flushing crankcase cleaning screens and filters greasing moving parts and checking brakes. Supervises the jacking and towing of aircraft enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily service engines and airframe components at line station making repairs short of overhaul required to keep aircraft in safe operating condition specialize in work repair and modification of structural precision and functional spare parts and assemblies and specialize in engine repair. May be required to be licensed by Federal Aviation Administration. May require specialization in sheet-metal electric work avionics or other aircraft systems related disciplines.

Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below:

Airframe/Structural Corrosion Landing Gear Wing/Pylon Fold Hydraulic/Pneumatic and mechanical Flight Control Systems

Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions disassembles inspects evaluates and accomplishes necessary repairs lays out work according to technical instructions and technical directives. Determines what repairs modifications and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform.

Task Requirements:

Preferred Qualifications:

Basic Qualifications:

Employment is contingent on a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; (d) your ability to provide proof of COVID vaccination status (e) your ability to get a required clearance by your effective start date if needed and (f) KAI commencing performance on this contract.

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2022-5-13

Please Apply by: 2022-5-29