L&T TECHNOLOGY SERVICES LIMITED job details and career information

Aviation Hardware Engineer Hot

Location
Huntington, New York
Wage
Hourly
Job ID
12538970076
Posted
2020-9-16

L&T Technology Services Limited (LTTS) is a listed subsidiary of Larsen and Toubro Limited focused on Engineering and R&D (ER&D) services. We offer consultancy design development and testing services across the product and process development life cycle. Our customer base includes 52 Fortune 500 companies and 51 of the worlds top ER&D companies across industrial products medical devices transportation telecom and hi-tech and the process industries. Headquartered in India we have over 14700 employees spread across 17 global design centers 27 global sales offices and 48 innovation labs as of December 31 2018. For additional information about L&T Technology Services log on to www.LntTechservices.com Job description: Experience Range 5-7 years Job Description and Skill Requirement Design test experience in Flight display and avionics systems Lead the requirements design and test support activities from concept to production under minimal supervision Responsible for capturing requirements implementing hardware design solution using schematic entry tools Responsible for documentation of performance analysis results for requirements verification purposes Act as a Technical Lead supporting the Engineering Project Manager Define design and implement control systems Lead and participate in the review of Control Systems Test Plans and Procedures and update them as needed Perform analysis to find the root cause for electrical conversion and controls problems Modeling and simulation experience with one or more of the following: Matlab HFSS FEKO ADS Antenna and RF circuit design knowledge. Skills: Understanding of military and commercial qualification specifications including: DOD-STD-2167A Order 8110-101A DO-160 and DO-254 Background and understanding of aircraft display systems including: PFD MFD and Head-Up Display systems Prior work experience in Avionics System Requirement management using DOORS Avionics I/O interfaces including ARINC 429 MIL-STD-1553 and Ethernet Experience in Video interfaces including SMPTE DVI and DisplayPort Interfacing with complex embedded devices (microprocessors 2D/3D graphics processors ASICs FPGAs) Schematic capture of digital/analog mixed signal electrical circuit designs for avionics Experience completing printed circuit board (PWC) layout Experience in FMEA MTBF worst-case analysis. Profile description: Job Role: Aviation Hardware Electrical Engineer Job Type: Full Time Job location: Bohemia NY Experience Range 5-7 years Job Description and Skill Requirement Design test experience in Flight display and avionics systems Lead the requirements design and test support activities from concept to production under minimal supervision Responsible for capturing requirements implementing hardware design solution using schematic entry tools Responsible for documentation of performance analysis results for requirements verification purposes Act as a Technical Lead supporting the Engineering Project Manager Define design and implement control systems Lead and participate in the review of Control Systems Test Plans and Procedures and update them as needed Perform analysis to find the root cause for electrical conversion and controls problems Modeling and simulation experience with one or more of the following: Matlab HFSS FEKO ADS Antenna and RF circuit design knowledge. Skills: Understanding of military and commercial qualification specifications including: DOD-STD-2167A Order 8110-101A DO-160 and DO-254 Background and understanding of aircraft display systems including: PFD MFD and Head-Up Display systems Prior work experience in Avionics System Requirement management using DOORS Avionics I/O interfaces including ARINC 429 MIL-STD-1553 and Ethernet Experience in Video interfaces including SMPTE DVI and DisplayPort Interfacing with complex embedded devices (microprocessors 2D/3D graphics processors ASICs FPGAs) Schematic capture of digital/analog mixed signal electrical circuit designs for avionics Experience completing printed circuit board (PWC) layout Experience in FMEA MTBF worst-case analysis. We offer: Job Role: Aviation Hardware Electrical Engineer Job Type: Full Time Job location: Bohemia NY Experience Range 5-7 years Job Description and Skill Requirement Design test experience in Flight display and avionics systems Lead the requirements design and test support activities from concept to production under minimal supervision Responsible for capturing requirements implementing hardware design solution using schematic entry tools Responsible for documentation of performance analysis results for requirements verification purposes Act as a Technical Lead supporting the Engineering Project Manager Define design and implement control systems Lead and participate in the review of Control Systems Test Plans and Procedures and update them as needed Perform analysis to find the root cause for electrical conversion and controls problems Modeling and simulation experience with one or more of the following: Matlab HFSS FEKO ADS Antenna and RF circuit design knowledge. Skills: Understanding of military and commercial qualification specifications including: DOD-STD-2167A Order 8110-101A DO-160 and DO-254 Background and understanding of aircraft display systems including: PFD MFD and Head-Up Display systems Prior work experience in Avionics System Requirement management using DOORS Avionics I/O interfaces including ARINC 429 MIL-STD-1553 and Ethernet Experience in Video interfaces including SMPTE DVI and DisplayPort Interfacing with complex embedded devices (microprocessors 2D/3D graphics processors ASICs FPGAs) Schematic capture of digital/analog mixed signal electrical circuit designs for avionics Experience completing printed circuit board (PWC) layout Experience in FMEA MTBF worst-case analysis.

Aviation Rescue Swimmer huntington Huntington IN

Aviation Rescue Swimmer huntington Huntington NY

Cnc Programmer Engineering Tech Acra NY

Avionics Mission Processing Systems Engineer Staff Castle Creek NY

Aviation Technician Structures 2nd Shift Lockwood NY

Director Business Development Army Aviation Airborne Surveillance Thermal I Alabama NY

Aviation Rescue Swimmer monsey Monsey NY

Cnc Programmer Engineering Tech Acra NY

Aviation Hardware Engineer Islip NY

Selling Associate Aviation Queensbury NY

The following jobs have been promoted on the Aviation Ad Network and are to be considered - current, newsworthy aviation employment information (FYI). No guarantee is made as to the accuracy, completeness or timeliness of any information, projections or opinions in announcements obtained through the promoted jobs. The information contained in this announcement is compiled for the convenience of site visitors and is accepted by the site visitor on the condition that errors or omissions are not the responsibility of Avjobs and shall not be made the basis for any claim, demand or cause of action. Please visit this companys web site for additional details and information. Please reference Avjobs when applying.

Top Employer L&T TECHNOLOGY SERVICES LIMITED Jobs
Website
www.avjobs.com/companies
Job Feed
View
News Feed
View
List All L&T TECHNOLOGY SERVICES LIMITED Jobs

Don't wait, apply today.
We can't wait to receive your resume.

L&T TECHNOLOGY SERVICES LIMITED is accepting resumes and actively recruiting for this Aviation Hardware Engineer position in Huntington, New York. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Aviation Hardware Engineer

Location: Huntington NY

Industry: Aviation
Occupational Category: Engineering
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: L&T TECHNOLOGY SERVICES LIMITED seeks a Aviation Hardware Engineer.
L&T Technology Services Limited (LTTS) is a listed subsidiary of Larsen and Toubro Limited focused on Engineering and R&D (ER&D) services. We offer consultancy design development and testing services across the product and process development life cycle. Our customer base includes 52 Fortune 500 companies and 51 of the worlds top ER&D companies across industrial products medical devices transportation telecom and hi-tech and the process industries. Headquartered in India we have over 14700 employees spread across 17 global design centers 27 global sales offices and 48 innovation labs as of December 31 2018. For additional information about L&T Technology Services log on to www.LntTechservices.com Job description: Experience Range 5-7 years Job Description and Skill Requirement Design test experience in Flight display and avionics systems Lead the requirements design and test support activities from concept to production under minimal supervision Responsible for capturing requirements implementing hardware design solution using schematic entry tools Responsible for documentation of performance analysis results for requirements verification purposes Act as a Technical Lead supporting the Engineering Project Manager Define design and implement control systems Lead and participate in the review of Control Systems Test Plans and Procedures and update them as needed Perform analysis to find the root cause for electrical conversion and controls problems Modeling and simulation experience with one or more of the following: Matlab HFSS FEKO ADS Antenna and RF circuit design knowledge. Skills: Understanding of military and commercial qualification specifications including: DOD-STD-2167A Order 8110-101A DO-160 and DO-254 Background and understanding of aircraft display systems including: PFD MFD and Head-Up Display systems Prior work experience in Avionics System Requirement management using DOORS Avionics I/O interfaces including ARINC 429 MIL-STD-1553 and Ethernet Experience in Video interfaces including SMPTE DVI and DisplayPort Interfacing with complex embedded devices (microprocessors 2D/3D graphics processors ASICs FPGAs) Schematic capture of digital/analog mixed signal electrical circuit designs for avionics Experience completing printed circuit board (PWC) layout Experience in FMEA MTBF worst-case analysis. Profile description: Job Role: Aviation Hardware Electrical Engineer Job Type: Full Time Job location: Bohemia NY Experience Range 5-7 years Job Description and Skill Requirement Design test experience in Flight display and avionics systems Lead the requirements design and test support activities from concept to production under minimal supervision Responsible for capturing requirements implementing hardware design solution using schematic entry tools Responsible for documentation of performance analysis results for requirements verification purposes Act as a Technical Lead supporting the Engineering Project Manager Define design and implement control systems Lead and participate in the review of Control Systems Test Plans and Procedures and update them as needed Perform analysis to find the root cause for electrical conversion and controls problems Modeling and simulation experience with one or more of the following: Matlab HFSS FEKO ADS Antenna and RF circuit design knowledge. Skills: Understanding of military and commercial qualification specifications including: DOD-STD-2167A Order 8110-101A DO-160 and DO-254 Background and understanding of aircraft display systems including: PFD MFD and Head-Up Display systems Prior work experience in Avionics System Requirement management using DOORS Avionics I/O interfaces including ARINC 429 MIL-STD-1553 and Ethernet Experience in Video interfaces including SMPTE DVI and DisplayPort Interfacing with complex embedded devices (microprocessors 2D/3D graphics processors ASICs FPGAs) Schematic capture of digital/analog mixed signal electrical circuit designs for avionics Experience completing printed circuit board (PWC) layout Experience in FMEA MTBF worst-case analysis. We offer: Job Role: Aviation Hardware Electrical Engineer Job Type: Full Time Job location: Bohemia NY Experience Range 5-7 years Job Description and Skill Requirement Design test experience in Flight display and avionics systems Lead the requirements design and test support activities from concept to production under minimal supervision Responsible for capturing requirements implementing hardware design solution using schematic entry tools Responsible for documentation of performance analysis results for requirements verification purposes Act as a Technical Lead supporting the Engineering Project Manager Define design and implement control systems Lead and participate in the review of Control Systems Test Plans and Procedures and update them as needed Perform analysis to find the root cause for electrical conversion and controls problems Modeling and simulation experience with one or more of the following: Matlab HFSS FEKO ADS Antenna and RF circuit design knowledge. Skills: Understanding of military and commercial qualification specifications including: DOD-STD-2167A Order 8110-101A DO-160 and DO-254 Background and understanding of aircraft display systems including: PFD MFD and Head-Up Display systems Prior work experience in Avionics System Requirement management using DOORS Avionics I/O interfaces including ARINC 429 MIL-STD-1553 and Ethernet Experience in Video interfaces including SMPTE DVI and DisplayPort Interfacing with complex embedded devices (microprocessors 2D/3D graphics processors ASICs FPGAs) Schematic capture of digital/analog mixed signal electrical circuit designs for avionics Experience completing printed circuit board (PWC) layout Experience in FMEA MTBF worst-case analysis.

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2020-9-16

Please Apply by: 2020-10-2