Boeing job details and career information

00000331702 Graduate Design Engineer – Cabin Interiors Evergreen Open Featured

Location
Dublin, Leinster Ireland
Wage
Hourly
Job ID
00000331703
Posted
2022-8-10

Job Description

At Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are shared values. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The role

We are looking for Graduate Design Engineers who will work with the global engineering services team, across multiple time-zones, in order to identify requirements and their associated solutions for active and upcoming projects.

Responsibilities

You will develop engineering design solutions with the use of CAD for modifications to aircraft cabin systems such as:

  • Modification to cabin layout by introducing new LOPA (Layout of Passenger Accommodation) and its associated changes such as Passenger Service Units (PSU), Emergency Equipment, etc…

  • Installation of Galleys, monuments, lavatories throughout the cabin to meet end customer requirements.

  • Modification to the existing aircraft environmental systems such as air conditioning systems, water and waste.

  • Introduction of new aircraft paint schemes (liveries) and emergency marking system.

  • Installation/Modification of new OFCR (Overhead Flight Crew Rest) and OCRS (Overhead Crew Rest Station)

Produce substantiation documents in order to demonstrate compliance with relevant regulatory and operational requirements, including:

  • Flammability documentation

  • Design reports (egress, direct view, etc…)

  • Ground test plans and reports

  • Cabin walkthrough plans and reports

  • System Safety Analysis for interior components and systems.

Compile engineering accomplishment documentation and instructions for continued airworthiness including;

  • Service Bulletins / accomplishment instructions
  • Aircraft and component manual supplements

Work Authorisation:

This requisition is for a locally hired position in the UK. Candidates must have current legal authorisation to work immediately in the United Kingdom. Boeing will not attempt to obtain Immigration and labour sponsorship for any applicants.

Benefits and pay are determined at the local level and are not part of Boeing U.S. based payroll.

Additional responsibilities

  • Attend various meetings and represent Boeing on aircraft surveys and on-site installation support at various locations, UK and overseas.

  • Work closely with customers, outside vendors, MROs regulatory agencies and other teams within the company, to create engineering solutions that exceeds customer expectations on time and within budget.

  • Undertake all manner of design projects from simple changes to complex STCs.

  • Attend multiple instructor-led training courses for hard and soft skills improvement.

Skills

  • Bachelor’s Degree within Aerospace/Aeronautical Engineering (final year students with results pending are acceptable)

  • Current or recent employment within the aerospace industry specifically working with an EASA Part 21J Design Organisation (or equivalent) is preferable

  • CATIA V5 and/or AutoCAD industrial experience

  • Working knowledge of sheet metal forming/fabrication/machining

  • Working knowledge of aircraft material and fastener selection, hole size types, sealants & finishing

  • Able to demonstrate a working knowledge of EASA regulatory and airworthiness requirements including (E)TSO, CS-25, CS-25, CFR Part 25 & Part 21J design organisations

  • A high level of attention to detail and professional integrity

  • Ability to work on multiple programmes with varying level of requirements efficiently and effectively

  • Ability to prioritise workloads and show flexibility to changing situations / demands


Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Design & Senior Design Engineer – Cabin Interiors Dublin Leinster

Electrical/Avionics Engineer & Senior Engineer EASA Modifications Dublin Leinster

Electrical/Avionics Engineer & Senior Engineer EASA Modifications Dublin Leinster

00000331702 Graduate Design Engineer – Cabin Interiors Evergreen Open Dublin Leinster

Design & Senior Design Engineer – Cabin Interiors Dublin Leinster

00000331702 Graduate Design Engineer – Cabin Interiors Evergreen Open Dublin Leinster

Design & Senior Design Engineer – Cabin Interiors Dublin Leinster

Electrical/Avionics Engineer & Senior Engineer EASA Modifications Dublin Leinster

Engineering Manager Electrical and Avionics Systems Dublin Leinster

Associate Embedded Software Engineer Harpoon Cruise Missile St Charles MO

Boeing is the worlds largest aerospace company and leading manufacturer of commercial jetliners and defense space and security systems. As Americas biggest manufacturing exporter the company supports airlines and U.S. and allied government customers in more than 150 countries. Boeing products and tailored services include commercial and military aircraft satellites weapons electronic and defense systems launch systems advanced information and communication systems and performance-based logistics and training.

Top Employer Boeing Jobs
Website
jobs.boeing.com/
Job Feed
View
News Feed
View
List All Boeing Jobs

Don't wait, apply today.
We can't wait to receive your resume.

Boeing is accepting resumes and actively recruiting for this 00000331702 Graduate Design Engineer – Cabin Interiors Evergreen Open position in Dublin, . Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

00000331702 Graduate Design Engineer – Cabin Interiors Evergreen Open

Location: Dublin Leinster

Industry: Aviation
Occupational Category: Mechanical & Structural Engineering
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: Boeing seeks a 00000331702 Graduate Design Engineer – Cabin Interiors Evergreen Open.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are shared values. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The role

We are looking for Graduate Design Engineers who will work with the global engineering services team, across multiple time-zones, in order to identify requirements and their associated solutions for active and upcoming projects.

Responsibilities

You will develop engineering design solutions with the use of CAD for modifications to aircraft cabin systems such as:

  • Modification to cabin layout by introducing new LOPA (Layout of Passenger Accommodation) and its associated changes such as Passenger Service Units (PSU), Emergency Equipment, etc…

  • Installation of Galleys, monuments, lavatories throughout the cabin to meet end customer requirements.

  • Modification to the existing aircraft environmental systems such as air conditioning systems, water and waste.

  • Introduction of new aircraft paint schemes (liveries) and emergency marking system.

  • Installation/Modification of new OFCR (Overhead Flight Crew Rest) and OCRS (Overhead Crew Rest Station)

Produce substantiation documents in order to demonstrate compliance with relevant regulatory and operational requirements, including:

  • Flammability documentation

  • Design reports (egress, direct view, etc…)

  • Ground test plans and reports

  • Cabin walkthrough plans and reports

  • System Safety Analysis for interior components and systems.

Compile engineering accomplishment documentation and instructions for continued airworthiness including;

  • Service Bulletins / accomplishment instructions
  • Aircraft and component manual supplements

Work Authorisation:

This requisition is for a locally hired position in the UK. Candidates must have current legal authorisation to work immediately in the United Kingdom. Boeing will not attempt to obtain Immigration and labour sponsorship for any applicants.

Benefits and pay are determined at the local level and are not part of Boeing U.S. based payroll.

Additional responsibilities

  • Attend various meetings and represent Boeing on aircraft surveys and on-site installation support at various locations, UK and overseas.

  • Work closely with customers, outside vendors, MROs regulatory agencies and other teams within the company, to create engineering solutions that exceeds customer expectations on time and within budget.

  • Undertake all manner of design projects from simple changes to complex STCs.

  • Attend multiple instructor-led training courses for hard and soft skills improvement.

Skills

  • Bachelor’s Degree within Aerospace/Aeronautical Engineering (final year students with results pending are acceptable)

  • Current or recent employment within the aerospace industry specifically working with an EASA Part 21J Design Organisation (or equivalent) is preferable

  • CATIA V5 and/or AutoCAD industrial experience

  • Working knowledge of sheet metal forming/fabrication/machining

  • Working knowledge of aircraft material and fastener selection, hole size types, sealants & finishing

  • Able to demonstrate a working knowledge of EASA regulatory and airworthiness requirements including (E)TSO, CS-25, CS-25, CFR Part 25 & Part 21J design organisations

  • A high level of attention to detail and professional integrity

  • Ability to work on multiple programmes with varying level of requirements efficiently and effectively

  • Ability to prioritise workloads and show flexibility to changing situations / demands


Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2022-8-10

Please Apply by: 2022-8-26