Boeing job details and career information

Assembler Installer Doors B Featured

Location
Renton, Washington
Wage
Hourly
Job ID
00000330414
Posted
2022-9-26

Job Description

At Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are shared values. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company is seeking Assembler Installer Doors to join our teams supporting Boeing Commercial Airplanes in either our Renton or Everett locations in Washington State! This is an exciting opportunity to install, rig and adjust door parts and assemblies into aircraft body structures.

Mechanics in this position install, rig and adjust door parts and assemblies into aircraft body structures. They may set up and perform some functional and operational tests of all door systems.

Position Responsibilities:

  • Locate work area using drawings which specifies airplane number, section number, and three-point location.

  • Obtain and verify kitted (pre-picked) detail parts, standards, and assemblies were issued correctly.

  • Ensure that parts issued are effective for the airplane and are free of visible defects.

  • If parts are not pre-picked, get parts and ensure that parts selected are effective for the airplane and are free of visible defects.

  • Set up assembly tools per tooling instructions or drawing.

  • Review bar chart or automated time line to determine which job to work on and obtain appropriate drawings for job.

  • Drill, ream, countersink close tolerance holes and install fasteners in parts/assemblies per drawing using correct tools (e.g., drill motor, rivet gun, torque wrench).

  • Locate door assembly to airplane structure, install close tolerance bolt(s) and bushings/spacers for initial door alignment.

  • Align door assembly to roller fittings, guides and latch tracks. Check door swing into fuselage. Adjust fit using door rigging tools. Ensure door has correct fit and fair with fuselage when closed. Align scuff plate. Shim and trim door for fit using planers, rotary sanders and hand files.

  • Install door hardware including warning sensor, pressure/bulb seal, liner brackets, bustle hardware and other attachments. Check seals for gaps and light leaks. Check door handle and hinges for proper angle using a protractor and/or inclinometer and adjust. Perform seal check on door installation, as required. Utilize vacuum pressurization equipment on exterior of door and check for leaks using an ultrasonic leak detector on interior surfaces.

  • Install personnel evacuation slides, life rafts, and components (e.g., high pressure and explosive bottles, thrusters, battery), as required. Assist in slide deployment checks to ensure proper operation.

  • Coordinate with other ongoing tests on the aircraft. Lock out/Tag out systems when performing tests. Set up and perform tests of all door systems (e.g., mechanical and electrical) to ensure related cockpit instruments are functioning correctly.

  • Apply sealant, alodine, primer, adhesives, and special finishes.

  • Handle and dispose of hazardous materials in approved manner. Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.

  • Frequent (3-6 Hrs.) Handling (holding, grasping), Kneeling, Sitting, Standing, Walking.

  • Working around constant noise.

  • Flexion/extension (head bent down, head bent back), finger manipulation, handling, kneeling, bending at the waist, reaching (overhead), Lying down (back, side, front), rotation of head/neck, standing, twisting at the waist, walking.

  • Climbing/balancing (stairs, ladders, poles, scaffolding, inclined surfaces), Crawling, Crouching (squatting).

  • Lifting and carrying up to 10-35 pounds.

This position is expected to be 100% onsite.  The selected candidate will be required to work onsite at one of the listed location options.

The position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Basic Qualifications (Required Skills/Experience):

  • 1 year experience using hand tools and/or hand-held power tools

Preferred Qualifications (Desired Skills/Experience):

  • 1 year experience reading and interpreting drawings, specifications, material processes, schematic and diagrams

  • Attended a Boeing partnered manufacturing related high school or community and technology college academic program

Typical Education & Experience:

High school diploma and/or General Education Diploma (GED)

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Other Relevant Information & Requirements

Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Shift Work Statement

This position is for variable shift


Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Inspector Assembly And Installation B Renton WA

Assembler Installer Renton WA

54506 029 Rework Invstgtr & Inspctr B Renton WA

Assembler Installer Electrical Systems B Renton WA

Flight Deck Engineering Program Manager 737 MAX and BFMS Renton WA

Assembler Installer Cable Center Systems B Renton WA

54506 029 Rework Invstgtr & Inspctr B Renton WA

Experienced Business Operations Specialist Renton WA

Inspector Assembly and Installation B Renton WA

Environmental Controls Tech B Renton WA

Boeing is the worlds largest aerospace company and leading manufacturer of commercial jetliners and defense space and security systems. As Americas biggest manufacturing exporter the company supports airlines and U.S. and allied government customers in more than 150 countries. Boeing products and tailored services include commercial and military aircraft satellites weapons electronic and defense systems launch systems advanced information and communication systems and performance-based logistics and training.

Top Employer Boeing Jobs
Website
jobs.boeing.com/
Job Feed
View
News Feed
View
List All Boeing Jobs

Don't wait, apply today.
We can't wait to receive your resume.

Boeing is accepting resumes and actively recruiting for this Assembler Installer Doors B position in Renton, Washington. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Assembler Installer Doors B

Location: Renton WA

Industry: Aviation
Occupational Category: All Hourly Unions
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: Boeing seeks a Assembler Installer Doors B.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are shared values. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company is seeking Assembler Installer Doors to join our teams supporting Boeing Commercial Airplanes in either our Renton or Everett locations in Washington State! This is an exciting opportunity to install, rig and adjust door parts and assemblies into aircraft body structures.

Mechanics in this position install, rig and adjust door parts and assemblies into aircraft body structures. They may set up and perform some functional and operational tests of all door systems.

Position Responsibilities:

  • Locate work area using drawings which specifies airplane number, section number, and three-point location.

  • Obtain and verify kitted (pre-picked) detail parts, standards, and assemblies were issued correctly.

  • Ensure that parts issued are effective for the airplane and are free of visible defects.

  • If parts are not pre-picked, get parts and ensure that parts selected are effective for the airplane and are free of visible defects.

  • Set up assembly tools per tooling instructions or drawing.

  • Review bar chart or automated time line to determine which job to work on and obtain appropriate drawings for job.

  • Drill, ream, countersink close tolerance holes and install fasteners in parts/assemblies per drawing using correct tools (e.g., drill motor, rivet gun, torque wrench).

  • Locate door assembly to airplane structure, install close tolerance bolt(s) and bushings/spacers for initial door alignment.

  • Align door assembly to roller fittings, guides and latch tracks. Check door swing into fuselage. Adjust fit using door rigging tools. Ensure door has correct fit and fair with fuselage when closed. Align scuff plate. Shim and trim door for fit using planers, rotary sanders and hand files.

  • Install door hardware including warning sensor, pressure/bulb seal, liner brackets, bustle hardware and other attachments. Check seals for gaps and light leaks. Check door handle and hinges for proper angle using a protractor and/or inclinometer and adjust. Perform seal check on door installation, as required. Utilize vacuum pressurization equipment on exterior of door and check for leaks using an ultrasonic leak detector on interior surfaces.

  • Install personnel evacuation slides, life rafts, and components (e.g., high pressure and explosive bottles, thrusters, battery), as required. Assist in slide deployment checks to ensure proper operation.

  • Coordinate with other ongoing tests on the aircraft. Lock out/Tag out systems when performing tests. Set up and perform tests of all door systems (e.g., mechanical and electrical) to ensure related cockpit instruments are functioning correctly.

  • Apply sealant, alodine, primer, adhesives, and special finishes.

  • Handle and dispose of hazardous materials in approved manner. Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.

  • Frequent (3-6 Hrs.) Handling (holding, grasping), Kneeling, Sitting, Standing, Walking.

  • Working around constant noise.

  • Flexion/extension (head bent down, head bent back), finger manipulation, handling, kneeling, bending at the waist, reaching (overhead), Lying down (back, side, front), rotation of head/neck, standing, twisting at the waist, walking.

  • Climbing/balancing (stairs, ladders, poles, scaffolding, inclined surfaces), Crawling, Crouching (squatting).

  • Lifting and carrying up to 10-35 pounds.

This position is expected to be 100% onsite.  The selected candidate will be required to work onsite at one of the listed location options.

The position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Basic Qualifications (Required Skills/Experience):

  • 1 year experience using hand tools and/or hand-held power tools

Preferred Qualifications (Desired Skills/Experience):

  • 1 year experience reading and interpreting drawings, specifications, material processes, schematic and diagrams

  • Attended a Boeing partnered manufacturing related high school or community and technology college academic program

Typical Education & Experience:

High school diploma and/or General Education Diploma (GED)

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Other Relevant Information & Requirements

Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Shift Work Statement

This position is for variable shift


Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2022-9-26

Please Apply by: 2022-10-12