Dallas, TX
he demands of the job Must be able to lift and move up to 50 pounds Ability to work in aircraft AISles and galleys, standing, reaching (extending in front of body and above head), walking, kneeling, stooping, and sitting for periods of long duration Ability to operate aircraft doors (pushing and pulling), and entry stands Traveling work environment subject to varying climate conditions, air turbulence, changing locations, variable hours and working conditions, dry air, noise levels from engines and other ground equipment, dim lighting, confined spaces, and continuous a
2026-5-26
Denver, CO
ia or another high-seismic state. Proven experience with major building codes (IBC ASCE 7 ACI 318 AISC TMS 402/602 NDS). Advanced proficiency in 3D structural analysis software (ETABS SAP2000 RISA RAM Structural SAFE etc.). Demonstrated experience designing concrete steel masonry and timber. Strong experience in wind and seismic lateral design including retrofit of existing structures. Proficiency with Revit AutoCAD Bluebeam and Microsoft Office Suite. Excellent written and verbal communication skills. Experience with performance-based seismic design and nonlinea
2026-5-28
Denver, CO
o or ability to obtain via comity within 6 months Demonstrated experience with IBC ASCE 7 ACI 318 AISC TMS 402/602 NDS Advanced proficiency in structural analysis software ( ETABS SAP2000 RAM Structural RISA SAFE or similar) Experience designing structures using concrete steel masonry and timber Strong background in wind and seismic lateral systems including retrofit of existing structures Proficiency with Revit AutoCAD Bluebeam and Microsoft Office Strong written and verbal communication skills Ability to perform site visits; valid drivers license required Str
2026-5-28
Birmingham, AL
standards. Ensure designs comply with applicable codes and criteria including IBC ASCE 7 ACI 318 AISC 360 TMS NDS and other applicable state local and federal requirements. Lead structural coordination with architects and other engineering disciplines to ensure integrated code-compliant and constructible building designs. Serve as Engineer of Record when required for building structural projects. Support federal design execution by applying UFC UFGS and other agency-specific criteria relevant to projects for NASA FAA USACE and similar clients. Provide technical ment
2026-5-28
Milwaukee, WI
ions (for example must be able to sit in jump seat and fasten the harness move throughout the cabin AISle and operate emergency exits). For your safety your height must be between 5’0” to 6’0” without shoes Must be physically able to perform tasks that require frequent walking bending below ankle level and reaching above shoulder level; open emergency exits and close aircraft doors weighing up to 45 pounds; push and pull beverage cart weighing up to 250 pounds; and lift store transport and reach for items with or without reasonable accommodation Corrected vision should n
2026-5-15
Dayton, OH
standards. Ensure designs comply with applicable codes and criteria including IBC ASCE 7 ACI 318 AISC 360 TMS NDS and other applicable state local and federal requirements. Lead structural coordination with architects and other engineering disciplines to ensure integrated code-compliant and constructible building designs. Serve as Engineer of Record when required for building structural projects. Support federal design execution by applying UFC UFGS and other agency-specific criteria relevant to projects for NASA FAA USACE and similar clients. Provide technical ment
2026-5-28
Atlanta, GA
earance Technicians at Southwest clean the inside and outside of airplanes, replace seat covers and AISle rugs, and tidy up tools and work areas. They work in places like the hangar where our planes are parked and maintained, or they work on the ramp, where planes are parked for Customers to board for takeoff. They also drive vehicles to move equipment and follow safety rules to protect our Teams and Customers. This role is great for someone who enjoys working around aircraft, staying active, and being part of a Team that helps flights run safely and on time. Check out what a
2026-5-26
Hill Afb, UT
ated Test Stands (ITS) and OFP testing software tools in the Avionics Integration Support Facility (AISF). What You Will Be Doing The selected candidate will design, develop, document, test, debug, and maintain software used to test OFPs on ITS and in a virtual environment. Must have at minimum an Interim Secret Security Clearance. Must be able to obtain a Final Secret Security Clearance. Must be a US Citizen. Who You Are As an effective communicator, you excel in conveying complex information clearly and concisely, ensuring that all stakeholders understand key concepts an
2026-5-26
Roy, UT
(ASME?Y14.5-2023/ISO?1101-2023) surface-finish standards (ISO?1302/ASME?B46.1) material specs (ASTM AISI/SAE ISO?4949). • AWS welding certification; soldering/electronic-assembly knowledge (IPC-J-STD-001 IPC-A-610 IPC-2221/2222 MIL-STD-883). • Cable-harness fabrication standards (IPC/WHMA-A-620 MIL-STD-196). • Coating-system qualification (ISO?12944-5 ASTM?B117 MIL-PRF-23377 MIL-PRF-32239 MIL-DTL-53022). • Ability to obtain/maintain DoD Top-Secret. • Proven oral/written skills; experience presenting to high-value customers; juggle multiple projects.
2026-5-26
Creech Afb, NV
ssue Notices to Airman NOTAMs and local airfield advisories Operate Aeronautical Information System AIS process flight plans and other air traffic related data Operate the pilottodispatch PTD radio Activate the crash alarm notification circuit in response to inflight emergencies ground accidents or incidents and contingency or exercise requirements Disseminate hazardous weather conditions to applicable organizations Maintain data on inbound outbound and local aircraft and initiates overdue aircraft actions when appropriate Maintain the Aircrew lounge for transient aircrew awai
2026-5-27
Free Aviation Jobs Newsletter
2026-5-31
Public search utility limited to 10 most recent results. Please sign in or
register to view all search results & apply.
Aviation Job Search