Let employers find you
2026-8-14
Beavercreek, OH
F 35 Logistics Sustainment Senior Manager Management BEAVERcreek OH OHIO Booz Allen Hamilton United States 36348481351
2026-8-14
Beaver, OH
Aerospace Metals Business Development Manager Germany Management BEAVER OH OHIO ITP United States 36416202521
2026-8-14
Beavercreek, OH
Senior Aerospace Systems Engineer Engineering BEAVERcreek OH OHIO Guidehouse United States 36416206731
2026-8-14
Tulsa, OK
tooling, and equipment on truck and trailers secure load and accessory equipment to prevent loss or DAMage. Check equipment such as tires, lights, brakes, fuel, water, and oil supplies. Perform emergency roadside maintenance such as changing tires or spark plugs, installing light bulbs, fuses or putting on chains. Rig loads to truck and overhead cab cranes correlating weights with boom lengths and angles for truck cranes, determine proper load balance and positioning. Operate cranes in response to ground signals to lift, move, lower and position airplanes, large produc
2026-8-14
Wichita, KS
sical methods and finite element analysis (FEA) tools Evaluate strength, stability, fatigue, and DAMage tolerance to ensure compliance with design and certification requirements Develop and document analysis models, assumptions, and results in technical reports Collaborate with design, manufacturing, and test teams to resolve structural issues and support design integration Provide analysis-based recommendations during technical and design reviews Support certification activities by ensuring compliance with regulatory requirements and airworthiness standards
2026-8-14
Wichita, KS
ographic techniques to evaluate the properties of materials, components, or systems without causing DAMage Utilize Film and Non-Film Radiographic inspections to verify parts are in compliance with customer engineering requirements Perform process control tests, set-up parts and operate X-ray equipment, process film and/or IP, interpret and evaluate for acceptance or rejection, and document results Conduct system performance checks in accordance with applicable process standards Provide necessary guidance and/or supervision to trainees Perform audit surveillance
2026-8-14
Wichita, KS
analysis techniques to evaluate the properties of materials, components or systems without causing DAMage. Utilize Non-Destructive inspection methods (ultrasonic, eddy current) to verify parts and processes are in compliance with customer engineering requirements. Set-up and standardize NDI equipment, process parts, interpret and evaluate for acceptance or rejection, and document results. Establish techniques from approved general procedure or work instructions for final approval. Conduct system performance checks in accordance with applicable process standards.
2026-8-14
Wichita, KS
ncluding, using power or hand operated tools and equipment, checking hardware and tools for visible DAMage, routing broken, worn, or obsolete hardware and tools to proper authority for disposition, opening containers and identifying weight and count of contents and verifying quality of incoming hardware. Additionally, operate any and all types of information systems required to perform assigned task. Utilize proper equipment and devices to assure parts, equipment, structures, etc. are appropriately protected. Load and unload air cargo as required. Check condition of t
2026-8-14
Wichita, KS
e areas of aircraft surface to ensure complete protection of windows and other areas susceptible to DAMage Remove stripper excess paint andor contaminants using water solvents air blower andor brushes Sand grind and buff polished areas of aircraft surface apply putty to body dents and replace sealer in preparation for the application of primer and paint Apply Alodine to aircraft surface using spray equipment Perform touchup work as required Document work performed per Inspection Procedures Manual IPM Perform above tasks in support of production flight test and other outside ar
2026-8-14
Ft Smith, AR
ties. - Knowledge of troubleshooting and repair - Knowledge of Safety, Tool Control, Foreign Object DAMage (FOD), Supply, Hazardous Material (HAZMAT), Quality, and Security programs Desired Skills: The following Desired Skills are not required but are those skills that would set a candidate apart from the other candidates: - An FAA aircraft and Power Plant Mechanic license is desirable. - Experience as an On-The-Job trainer. - Proficiency with LM’s F-35 Nose-to-Tail maintenance concept - Engine Run Certification, fighter aircraft crew escape systems (i.e. canopy and eje
2026-8-13
Take Charge of Your Future Today!
2026-8-14
Public search utility limited to 10 most recent results. Please sign in or
register to view all search results & apply.
Aviation Job Search